Home › Vehicle Exterior › LIGHTING (EXT) › HIGH MOUNTED STOP LIGHT ASSEMBLY (for Double Swing Out Type)
RM2660E _59 Vehicle Exterior _052855 LIGHTING (EXT) _0255813 HIGH MOUNTED STOP LIGHT ASSEMBLY(for Double Swing Out Type) G

LIGHTING (EXT)  HIGH MOUNTED STOP LIGHT ASSEMBLY(for Double Swing Out Type)  INSPECTION  


PROCEDURE

Hide 81570 1.INSPECT CENTER STOP LIGHT ASSEMBLY

a.
E233838E02
0.129,0.087 0.368,0.299 0.239,0.211 10 *a 2.312,1.317 2.707,1.498 0.395,0.181 10 B 0.816,1.306 0.972,1.487 0.156,0.181 10 E 1.575,1.395 0.976,1.414 false 1.881,1.37 2.294,1.405 false

Apply battery voltage to the connector, and check the LED illumination condition.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1 (B)
Battery negative (-) → Terminal 2 (E)
LED illuminates


If the result is not as specified, replace the center stop light assembly.

Text in Illustration
*a Component without harness connected
(Center Stop Light Assembly)