Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY(for Double Swing Out Type)
RM2660E _59 Vehicle Exterior _052855 LIGHTING (EXT) _0255815 REAR COMBINATION LIGHT ASSEMBLY(for Double Swing Out Type) A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY(for Double Swing Out Type)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81565A 1.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH

a.

Attach the claw.


b.

Attach the 2 guide to install the rear combination light socket and wire sub-assembly LH.


Hide 81580B 2.INSTALL TAIL AND STOP LIGHT BULB

a.
E233685

Install the tail and stop light bulb to the rear combination light socket and wire sub-assembly LH.


b.

Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow in the illustration to install the socket.


Hide 81550L 3.INSTALL REAR TURN SIGNAL LIGHT BULB

a.
E233684

Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly LH.


b.

Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow in the illustration to install the socket.


Hide 4.INSTALL REAR COMBINATION LIGHT ASSEMBLY LH

a.
E235610E01
0.732,1.414 0.887,1.596 0.156,0.181 10 *1 0.89,1.497 1.239,1.76 false 2.872,0.992 3.028,1.174 0.156,0.181 10 *1 2.867,1.078 2.6,0.905 false

Connect the connector.

Text in Illustration
*1 Protective tape


b.

Attach the 3 clips, 2 guides and 2 claws to install the rear combination light assembly LH.

NOTICE:

Attach the bolt installation bracket form outside the body while being careful not to bend it.



c.

Install the 2 bolts.