Home › Vehicle Exterior › LIGHTING (EXT) › BACK-UP LIGHT ASSEMBLY(for Double Swing Out Type)
RM2660E _59 Vehicle Exterior _052855 LIGHTING (EXT) _0255816 BACK-UP LIGHT ASSEMBLY(for Double Swing Out Type) A

LIGHTING (EXT)  BACK-UP LIGHT ASSEMBLY(for Double Swing Out Type)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81680 2.REMOVE BACK-UP LIGHT ASSEMBLY LH

a.
E234678

Remove the 2 nuts.


b.

Detach the claw and remove the back-up light assembly LH.


Hide 81675A 3.REMOVE BACK-UP LIGHT SOCKET PLUG

a.
E234127

Turn the back up light socket plug in the direction indicated by the arrow in the illustration and remove the back up light socket plug.


Hide 81670B 4.REMOVE BACK-UP LIGHT BULB

a.

Remove the back-up light bulb from the back-up light socket plug.