Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81110B
1.REMOVE NO. 1 HEADLIGHT BULB
Disconnect the connector.
Turn the No. 1 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 1 headlight bulb.
Do not touch the No. 1 headlight bulb glass.
81510C
2.REMOVE FRONT TURN SIGNAL LIGHT BULB
Turn the socket in the direction indicated by the arrow in the illustration and remove the socket.
Remove the front turn signal light bulb from the socket.