Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).
81590A
1.INSTALL REAR LIGHT ASSEMBLY LH
Attach the pin to set the rear light assembly LH.
Install the 3 nuts.
Connect the connector.
67935B
2.INSTALL BACK DOOR GARNISH
67937B
3.INSTALL BACK DOOR SIDE GARNISH RH
67938A
4.INSTALL BACK DOOR SIDE GARNISH LH
67939B
5.INSTALL BACK DOOR CENTER GARNISH