81590A
1.INSPECT REAR LIGHT ASSEMBLY LH
Apply battery voltage to the connector and check the light illumination condition.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → S24-2
Battery negative (-) → S24-4 |
Tail light illuminates |
| Battery positive (+) → S24-1
Battery negative (-) → S24-4 |
Stop light illuminates |
If the result is not as specified, replace the rear light assembly LH.
| *a | Component without harness connected
(Rear Light Assembly LH) |
81580D
2.INSPECT REAR LIGHT ASSEMBLY RH
Apply battery voltage to the connector and check the light illumination condition.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → S25-2
Battery negative (-) → S25-4 |
Tail light illuminates |
| Battery positive (+) → S25-1
Battery negative (-) → S25-4 |
Stop light illuminates |
If the result is not as specified, replace the rear light assembly RH.
| *a | Component without harness connected
(Rear Light Assembly RH) |