Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER(w/ Winch) › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052857 EXTERIOR PANELS / TRIM _0255829 FRONT BUMPER(w/ Winch) A

EXTERIOR PANELS / TRIM  FRONT BUMPER(w/ Winch)  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for HID Headlight)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 53806 3.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

a.
B310791

Remove the 3 bolts and screw.


b.

Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly LH.


Hide 53805 4.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

a.
B310792

Remove the 3 bolts and 2 screws.


b.

Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly RH.


Hide 53292A 5.REMOVE UPPER RADIATOR SUPPORT SEAL

Hide 52049 6.REMOVE FRONT BUMPER WINCH COVER SUB-ASSEMBLY

a.
B302213

Detach the 2 claws.


b.

Detach the 3 guides and remove front bumper winch cover sub-assembly.


Hide 53111 7.REMOVE RADIATOR GRILLE ASSEMBLY

Hide 52119A 8.REMOVE FRONT BUMPER COVER

a.

Put protective tape around the bumper cover.

B302214E01
0.982,1.402 1.412,1.402 false 0.816,1.333 1.052,1.534 0.236,0.201 10 *1

Text in Illustration
*1 Protective Tape - -


b.

Using a T30 "TORX" socket, remove the 6 screws.

B313279E01
0.379,0 0.669,0.302 0.290,0.302 10 *A 3.939,0 4.229,0.302 0.290,0.302 10 *B

Text in Illustration
*A LH Side *B RH Side


c.

Remove the 3 clips, 4 screws and 4 bolts.


d.

Detach the 10 claws.

B302215


e.

Disconnect the winch control wire connector and remove the front bumper cover.


f.

w/ Fog Light:

Disconnect the No. 4 engine room wire connector and remove the front bumper cover.


Hide 52113D 9.REMOVE FRONT BUMPER EXTENSION LH

a.
B185487

Remove the 3 bolts and front bumper extension LH.


Hide 52112D 10.REMOVE FRONT BUMPER EXTENSION RH

HINT:

Use the same procedure described for the LH side.


Hide 52116A 11.REMOVE FRONT BUMPER SIDE SUPPORT LH

a.
B313278

Remove the 2 screws.


b.

Detach the 3 clips and remove the front bumper side support LH.


Hide 52115A 12.REMOVE FRONT BUMPER SIDE SUPPORT RH

HINT:

Use the same procedure described for the LH side.


Hide 81150 13.REMOVE HEADLIGHT ASSEMBLY LH

Hide 81110 14.REMOVE HEADLIGHT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 52521 15.REMOVE FRONT UPPER CENTER BUMPER RETAINER

a.
B302216

Remove the 3 bolts and front upper center bumper retainer.