When installing the symbol emblem, rear No. 3 body name plate, No. 5 back door name plate and rear license light cover, heat the vehicle body, symbol emblem, rear No. 3 body name plate, No. 5 back door name plate and rear license light cover using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Symbol Emblem | 20 to 30°C (68 to 86°F) |
| Rear No. 3 Body Name Plate | 20 to 30°C (68 to 86°F) |
| No. 5 Back Door Name Plate | 20 to 30°C (68 to 86°F) |
| Rear License Light Cover | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body, symbol emblem, rear No. 3 body name plate, No. 5 back door name plate and rear license light cover excessively.
75741E
1.INSTALL SYMBOL EMBLEM
Clean the vehicle body surface.
| *a | Boss |
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install a new symbol emblem.
Using a heat light, heat the vehicle body and a new symbol emblem.
Remove the peeling paper from the face of the symbol emblem.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Align the boss positions and install the symbol emblem.
Press the symbol emblem firmly to install it.
75473B
2.INSTALL REAR NO. 3 BODY NAME PLATE
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install a new rear No. 3 body name plate.
Using a heat light, heat the vehicle body and a new rear No. 3 body name plate.
Remove the peeling paper from the face of the rear No. 3 body name plate.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the rear No. 3 body name plate in the position shown in the illustration.
Press the rear No. 3 body name plate firmly to install it.
| *A | for Type A | *B | for Type B |
| *a | 9.0 mm (0.354 in.) | *b | 10.4 mm (0.409 in.) |
| *c | 10.8 mm (0.425 in.) | *d | 9.1 mm (0.358 in.) |
| *e | 8.7 mm (0.343 in.) | *f | 8.8 mm (0.346 in.) |
| *g | 8.9 mm (0.350 in.) | *h | 8.6 mm (0.339 in.) |
75445A
3.INSTALL NO. 5 BACK DOOR NAME PLATE
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install a new No. 5 back door name plate.
Using a heat light, heat the vehicle body and a new No. 5 back door name plate.
Remove the peeling paper from the face of the No. 5 back door name plate.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the No. 5 back door name plate in the position shown in the illustration.
Press the No. 5 back door name plate firmly to install it.
| *A | for Type A | - | - |
| *a | 125.3 mm (4.93 in.) | *b | 18.1 mm (0.713 in.) |
| *c | 9.2 mm (0.362 in.) | *d | 9.6 mm (0.378 in.) |
| *e | 127.3 mm (5.01 in.) | *f | 20.1 mm (0.791 in.) |
| *g | 9.8 mm (0.386 in.) | *h | 183.4 mm (7.22 in.) |
| *i | 16.8 mm (0.66 in.) | *j | 9.5 mm (0.374 in.) |
| *k | 9.7 mm (0.382 in.) | *l | 185.4 mm (7.30 in.) |
| *m | 18.8 mm (0.740 in.) | - | - |
| *A | for Type B | - | - |
| *a | 125.3 mm (4.93 in.) | *b | 18.3 mm (0.720 in.) |
| *c | 9.6 mm (0.378 in.) | *d | 9.7 mm (0.382 in.) |
| *e | 183.4 mm (7.22 in.) | *f | 17.0 mm (0.669 in.) |
| *g | 9.8 mm (0.386 in.) | - | - |
75132C
4.INSTALL REAR LICENSE LIGHT COVER
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install a new rear license light cover.
| *a | Double-sided Tape |
Using a heat light, heat the vehicle body and a new rear license light cover.
Remove the peeling paper from the face of the emblem.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Attach the 7 claws to install the rear license light cover.
Press the rear license light cover firmly to install it.