When removing the symbol emblem, rear No. 3 body name plate, No. 5 back door name plate and rear license light cover, heat the vehicle body, symbol emblem, rear No. 3 body name plate, No. 5 back door name plate and rear license light cover using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Symbol Emblem | 20 to 30°C (68 to 86°F) |
| Rear No. 3 Body Name Plate | 20 to 30°C (68 to 86°F) |
| No. 5 Back Door Name Plate | 20 to 30°C (68 to 86°F) |
| Rear License Light Cover | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body, symbol emblem, rear No. 3 body name plate, No. 5 back door name plate and rear license light cover excessively.
75741E
1.REMOVE SYMBOL EMBLEM
Put protective tape around the symbol emblem.
Insert a piano wire between the vehicle body and symbol emblem.
Be careful of the boss position.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the symbol emblem to the vehicle body.
Be careful not to damage the vehicle body.
Remove the symbol emblem.
| *a | Protective Tape |
| *b | Wooden Block |
| *c | Boss |
75473B
2.REMOVE REAR NO. 3 BODY NAME PLATE
Put protective tape around the rear No. 3 body name plate.
Insert a piano wire between the vehicle body and rear No. 3 body name plate.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the rear No. 3 body name plate to the vehicle body.
Be careful not to damage the vehicle body.
Remove the rear No. 3 body name plate.
| *a | Protective Tape |
| *b | Wooden Block |
75445A
3.REMOVE NO. 5 BACK DOOR NAME PLATE
Put protective tape around the No. 5 back door name plate.
Insert a piano wire between the vehicle body and No. 5 back door name plate.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the No. 5 back door name plate to the vehicle body.
Be careful not to damage the vehicle body.
Remove the No. 5 back door name plate.
| *a | Protective Tape |
| *b | Wooden Block |
75132C
4.REMOVE REAR LICENSE LIGHT COVER
Put protective tape around the rear license light cover.
Detach the 7 claws and remove the double-sided tape to remove the rear license light cover.
| *a | Protective Tape |
| *b | Double-sided Tape |