When installing the back door garnish, heat the vehicle body and back door garnish using a heat light.
| Item | Temperature |
|---|---|
| Back Door Garnish | 20 to 30°C (68 to 86°F) |
| Vehicle Body | 40 to 60°C (104 to 140°F) |
Do not heat the back door garnish and vehicle body excessively.
76801B
1.INSTALL BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body surface.
Wipe off any tape adhesive residue with cleaner.
Install a new back door garnish.
Using a heat light, heat a new back door garnish and the vehicle body surface.
Remove the peeling paper from the face of the back door garnish.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Attach the 4 clips and double-sided tape to install the back door garnish.
Press the back door garnish firmly to install it.