Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052857 EXTERIOR PANELS / TRIM _0255850 ROCKER PANEL MOULDING A

EXTERIOR PANELS / TRIM  ROCKER PANEL MOULDING  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the RH side and LH side.

·

The procedures listed below are for the LH side.

·

When installing the rocker panel moulding, heat the vehicle body and rocker panel moulding using a heat light.



Standard Heating Temperature:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Rocker Panel Moulding 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the vehicle body and rocker panel moulding excessively.


PROCEDURE

Hide 75860A 1.INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY LH

a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

If reusing the rocker panel moulding:

Clean the rocker panel moulding.

i.

Using a heat light, heat the rocker panel moulding.


ii.

Remove the double-sided tape from the rocker panel moulding.


iii.

Wipe off any tape adhesive residue with cleaner.


iv.

Apply new double-sided tape to the rocker panel moulding, as shown in the illustration.

B180959E03
0.5,1.229 0.823,0.313 false 0.823,0.313 0.958,0.313 false 6.854,1.135 6.604,0.344 false 6.615,0.344 6.427,0.344 false 0.917,2.063 0.625,1.375 false 0.917,2.063 1.219,2.063 false 0.969,0.25 2.25,0.521 1.281,0.271 10 false Double-sided Tape 5.24,0.26 6.521,0.531 1.281,0.271 10 false Double-sided Tape 1.24,2 2.521,2.271 1.281,0.271 10 false Double-sided Tape



c.

Install the rocker panel moulding.

i.

Using a heat light, heat the vehicle body and rocker panel moulding.


ii.

Remove the peeling paper from the face of the rocker panel moulding.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Attach the 10 clips to install the rocker panel moulding.


iv.

Install the 8 side mudguard retainers and screw.

B180958E05
6,0.271 4.781,0.271 false 1.208,1.792 1.052,0.469 false 1.042,0.469 0.948,0.469 false 4.719,1.615 4.719,2.167 false 0.104,0.396 0.927,0.813 0.823,0.417 10 true Double-sided Tape 3.583,0.177 4.771,0.458 1.188,0.281 10 true Double-sided Tape 3.938,2.167 5.51,2.438 1.573,0.271 10 true Side Mudguard Retainer



Hide 76622D 3.INSTALL FRONT FENDER MUDGUARD LH