Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
75982B
1.REMOVE FENDER STRIPE LH
When removing the fender stripe LH, heat the vehicle body and fender stripe LH using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Fender Stripe LH | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body and fender stripe LH excessively.
Using a heat light, heat the vehicle body and fender stripe LH.
Pull back an edge of the fender stripe LH and pull it parallel to the vehicle body to remove it.
For snorkel-equipped vehicles, there is no fender stripe RH.
| *A | for Type A | *B | for Type B |
75986B
2.REMOVE FRONT DOOR STRIPE LH
When removing the front door stripe LH, heat the vehicle body and front door stripe LH using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Front Door Stripe LH | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body and front door stripe LH excessively.
Using a heat light, heat the vehicle body and front door stripe LH.
Pull back an edge of the front door stripe LH and pull it parallel to the vehicle body to remove it.
| *A | for Type A | *B | for Type B |
75988D
3.REMOVE REAR DOOR OUTSIDE STRIPE LH
When removing the rear door outside stripe LH, heat the vehicle body and rear door outside stripe LH using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Rear Door Outside Stripe LH | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body and rear door outside stripe LH excessively.
Using a heat light, heat the vehicle body and rear door outside stripe LH.
Pull back an edge of the rear door outside stripe LH and pull it parallel to the vehicle body to remove it.
| *A | for Type A | *B | for Type B |
75992D
4.REMOVE FRONT QUARTER STRIPE LH
When removing the front quarter stripe LH, heat the vehicle body and front quarter stripe LH using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Front Quarter Stripe LH | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body and front quarter stripe LH excessively.
Using a heat light, heat the vehicle body and front quarter stripe LH.
Pull back an edge of the front quarter stripe LH and pull it parallel to the vehicle body to remove it.
| *A | for Type A | *B | for Type B |