Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR GARNISH (for Double Swing Out Type)
RM2660E _59 Vehicle Exterior _052857 EXTERIOR PANELS / TRIM _0255856 BACK DOOR GARNISH(for Double Swing Out Type) A

EXTERIOR PANELS / TRIM  BACK DOOR GARNISH(for Double Swing Out Type)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

a.

Attach the 10 clips to install the back door outside garnish.


b.

Pass the wire harness the back door panel, and then attach the grommet.


c.

Connect the connector and attach the clamp.


Hide 69211C 2.INSTALL BACK DOOR OUTSIDE HANDLE

a.

Install the back door outside handle with the 2 bolts.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


b.

Connect the cable to the back door outside handle and attach the guide.


Hide 69290F 4.INSTALL BACK DOOR INSIDE HANDLE ASSEMBLY LH

Hide 74624B 5.INSTALL REAR ASSIST GRIP REINFORCEMENT LH

Hide 64790C 6.INSTALL BACK DOOR TRIM PANEL ASSEMBLY LH