Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR GARNISH (for Double Swing Out Type)
RM2660E _59 Vehicle Exterior _052857 EXTERIOR PANELS / TRIM _0255856 BACK DOOR GARNISH(for Double Swing Out Type) A

EXTERIOR PANELS / TRIM  BACK DOOR GARNISH(for Double Swing Out Type)  REMOVAL  


PROCEDURE

Hide 74624B 4.REMOVE REAR ASSIST GRIP REINFORCEMENT LH

Hide 69290F 5.REMOVE BACK DOOR INSIDE HANDLE ASSEMBLY LH

Hide 69211C 7.REMOVE BACK DOOR OUTSIDE HANDLE

a.
B291745

Detach the guide and disconnect the cable.


b.
B291749

Remove the 2 bolts and back door outside handle.


Hide 8.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

a.
B291750E01
0.396,0.172 0.595,0.346 0.200,0.174 10 *1 0.596,0.258 0.914,0.258 0.914,0.258 1.344,0.702 false

Detach the clamp and disconnect the connector.


b.

Detach the grommet, and then pull out the wire harness from the back door panel.

Text in Illustration
*1 Grommet


c.
B291751

Detach the 10 clips and remove the back door outside garnish.