Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR GARNISH (for Double Swing Out Type)
RM2660E _59 Vehicle Exterior _052857 EXTERIOR PANELS / TRIM _0255856 BACK DOOR GARNISH(for Double Swing Out Type) A

EXTERIOR PANELS / TRIM  BACK DOOR GARNISH(for Double Swing Out Type)  DISASSEMBLY  


PROCEDURE

Hide 75741E 1.REMOVE SYMBOL EMBLEM

HINT:

When removing the symbol emblem, heat the vehicle body and symbol emblem using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Symbol Emblem 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the vehicle body or symbol emblem excessively.


a.
B292546E01
2.279,0.444 2.472,0.595 0.193,0.151 10 *1 0.537,1.636 0.730,1.787 0.193,0.151 10 *2 0.394,2.538 0.587,2.689 0.193,0.151 10 *3 2.812,2.79 3.005,2.941 0.193,0.151 10 *3 0.733,1.729 1.155,1.533 false 0.585,2.62 0.837,2.62 false 2.578,2.879 2.812,2.879 false 2.279,0.545 1.882,0.545 false

Put protective tape around the symbol emblem.


b.

Insert piano wire between the vehicle body and symbol emblem.

HINT:

Be careful of the boss positions.



c.

Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.


d.

Pull the piano wire and scrape off the double-sided tape that holds the symbol emblem to the vehicle body.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the symbol emblem.

Text in Illustration
*1 Protective Tape
*2 Wooden Block
*3 Boss


Hide 76825C 2.REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR

a.
B292548

Remove the back door outside garnish protector.


Hide 76811A 3.REMOVE BACK DOOR OUTSIDE GARNISH

a.
B292549

Remove the 3 screws and back door outside garnish from the back door No. 2 outside garnish.


Hide 75132C 4.REMOVE REAR LICENSE LIGHT COVER

a.
B292550

Detach the 9 claws and remove the rear license light cover from the back door outside garnish.