Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR GARNISH (for Double Swing Out Type)
RM2660E _59 Vehicle Exterior _052857 EXTERIOR PANELS / TRIM _0255856 BACK DOOR GARNISH(for Double Swing Out Type) A

EXTERIOR PANELS / TRIM  BACK DOOR GARNISH(for Double Swing Out Type)  REASSEMBLY  


PROCEDURE

Hide 75132C 2.INSTALL REAR LICENSE LIGHT COVER

a.

Attach the 9 claws to install the rear license light cover to the back door outside garnish.


Hide 76811A 3.INSTALL BACK DOOR OUTSIDE GARNISH

a.

Install the back door outside garnish to the back door No. 2 outside garnish with the 3 screws.


Hide 76825C 4.INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR

HINT:

When installing the back door outside garnish protector, heat the back door outside garnish surface using a heat light.


Standard:
Item Temperature
Back Door Outside Garnish Sub-assembly 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the back door outside garnish sub-assembly excessively.


a.

Clean the back door outside garnish sub-assembly surface.

i.

Using a heat light, heat the back door outside garnish sub-assembly surface.


ii.

Remove the double-sided tape from the back door outside garnish sub-assembly surface.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B292548

Install a new back door outside garnish protector as shown in the illustration.


Hide 75741E 5.INSTALL SYMBOL EMBLEM

HINT:

When installing the symbol emblem, heat the vehicle body and symbol emblem using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Symbol Emblem 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the vehicle body or symbol emblem excessively.


a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B292547E01
0.405,2.521 0.596,2.684 0.191,0.163 10 *1 2.858,2.75 3.048,2.913 0.191,0.163 10 *1 0.602,2.608 0.837,2.608 false 2.568,2.86 2.837,2.86 false

Install a new symbol emblem.

i.

Using a heat light, heat the vehicle body and a new symbol emblem.


ii.

Remove the peeling paper from the face of the symbol emblem.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Align the boss positions and install the symbol emblem.

HINT:

Press the symbol emblem firmly to install it.


Text in Illustration
*1 Boss