Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT DOOR OUTSIDE MOULDING › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052857 EXTERIOR PANELS / TRIM _0255857 FRONT DOOR OUTSIDE MOULDING A

EXTERIOR PANELS / TRIM  FRONT DOOR OUTSIDE MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 75072A 1.REMOVE FRONT DOOR OUTSIDE MOULDING SUB-ASSEMBLY LH

a.
B302178E01
0.833,0.298 1.119,0.519 0.286,0.221 10 *1 1.005,0.487 1.311,1.005 false

Put protective tape around the front door outside moulding sub-assembly LH.

Text in Illustration
*1 Protective Tape


b.
B302170

Using a moulding remover, detach the 3 clamps and 11 clips, and remove the front door outside moulding sub-assembly LH.


c.

Remove any clips remaining on the door panel.

NOTICE:

Be careful not to allow any clips or pieces of clips to fall inside the door panel.