Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR DOOR OUTSIDE MOULDING › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052857 EXTERIOR PANELS / TRIM _0255858 REAR DOOR OUTSIDE MOULDING A

EXTERIOR PANELS / TRIM  REAR DOOR OUTSIDE MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 75076 1.REMOVE REAR DOOR OUTSIDE MOULDING SUB-ASSEMBLY LH

a.
B302179E01
0.965,0.016 1.189,0.208 0.224,0.192 10 *1 1.132,0.215 1.359,0.736 false

Put protective tape around the rear door outside moulding sub-assembly LH.

Text in Illustration
*1 Protective Tape


b.
B302171

Using a moulding remover, detach the 3 clamps and 7 clips, and remove the rear door outside moulding sub-assembly LH.


c.

Remove any clips remaining on the door panel.

NOTICE:

Be careful not to allow any clips or pieces of clips to fall inside the door panel.