Home › Vehicle Exterior › WINCH › RELAY
RM2660E _59 Vehicle Exterior _052858 WINCH _0255865 RELAY G

WINCH  RELAY  INSPECTION  


PROCEDURE

Hide 1.INSPECT WINCH MAIN RELAY

B167956

a.

Push in the plunger and release it. Check that it returns quickly to its original position.


b.
B189185E02
1.365,3.438 1.365,3.865 false 1.448,2.969 1.448,2.594 false 1.396,2.385 1.583,2.573 0.188,0.188 10 false A 1.323,3.865 1.552,4.073 0.229,0.208 10 false B 0.208,0.146 2.698,0.51 2.49,0.365 10 false Component without harness connected: (Winch Main Relay)

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A - B Battery voltage is not applied to terminals 1 and 2 10 MΩ or higher
Battery voltage is applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the winch main relay.