*: Use the GTS.
| Proceed to |
|---|
| NEXT |
NEXT
In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
The following 5 items are important points in the problem analysis:
| What | Vehicle model, system name |
| When | Date, time, occurrence frequency |
| Where | Road conditions |
| Under what conditions? | Running conditions, driving conditions, weather conditions |
| How did it happen? | Problem symptoms |
| Proceed to |
|---|
| NEXT |
NEXT
Measure the battery voltage.
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
| Proceed to |
|---|
| NEXT |
NEXT
Use the GTS to check if the CAN communication system is functioning normally.
for LHD with Central Gateway ECU.
for RHD with Central Gateway ECU.
for LHD without Central Gateway ECU.
for RHD without Central Gateway ECU.
| Result | Proceed to |
|---|---|
| CAN communication system DTC is not output | A |
| CAN communication system DTC is output (for LHD with Central Gateway ECU) | B |
| CAN communication system DTC is output (for RHD with Central Gateway ECU) | C |
| CAN communication system DTC is output (for LHD without Central Gateway ECU) | D |
| CAN communication system DTC is output (for RHD without Central Gateway ECU) | E |
A
B
C
D
E
Check for DTCs.
Click herePower Source / Network>3UR-FE (BATTERY / CHARGING)>CHARGING SYSTEM>DTC CHECK / CLEAR
Check for freeze frame data.
Click herePower Source / Network>3UR-FE (BATTERY / CHARGING)>CHARGING SYSTEM>FREEZE FRAME DATA
Record or print DTCs and freeze frame data if necessary.
| Proceed to |
|---|
| NEXT |
NEXT
Clear the DTCs and freeze frame data.
Click herePower Source / Network>3UR-FE (BATTERY / CHARGING)>CHARGING SYSTEM>DTC CHECK / CLEAR
| Proceed to |
|---|
| NEXT |
NEXT
Click herePower Source / Network>3UR-FE (BATTERY / CHARGING)>CHARGING SYSTEM>PROBLEM SYMPTOMS TABLE
| Result | Proceed to |
|---|---|
| Malfunctioning parts are not confirmed | A |
| Malfunctioning parts are confirmed | B |
A
B
Data List / Active Test.
Click herePower Source / Network>3UR-FE (BATTERY / CHARGING)>CHARGING SYSTEM>DATA LIST / ACTIVE TEST
| Result | Proceed to |
|---|---|
| Malfunctioning parts are not confirmed | A |
| Malfunctioning parts are confirmed | B |
A
B
Refer to Terminals of ECM.
Click herePower Source / Network>3UR-FE (BATTERY / CHARGING)>CHARGING SYSTEM>TERMINALS OF ECM
| Result | Proceed to |
|---|---|
| OK | A |
| NG | B |
A
B
Refer to Symptom Simulation.
| Proceed to |
|---|
| NEXT |
NEXT
| Proceed to |
|---|
| NEXT |
NEXT
| Proceed to |
|---|
| NEXT |
NEXT
| Proceed to |
|---|
| NEXT |
NEXT
| Proceed to |
|---|
| NEXT |
NEXT