Home › Engine / Hybrid System › 1UR-FE (ENGINE MECHANICAL) › CYLINDER HEAD › from 2016.08
RM2660E _51 Engine / Hybrid System _052776 1UR-FE ENGINE MECHANICAL _0255041 CYLINDER HEAD A

1UR-FE ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13711 1.REMOVE INTAKE VALVE

a.
A366791E01
2.917,0.323 3.01,0.323 false 0.438,0.656 0.563,0.656 0.563,0.656 0.667,0.844 true 0.094,0.573 0.448,0.771 0.354,0.198 10 false SST 3.063,0.229 3.417,0.427 0.354,0.198 10 true SST

Using SST, compress the compression spring and remove the valve spring retainer locks.

SST
09202-70020  (09202-01010, 09202-01020)
09202-00021  


b.

Remove the valve spring retainer, compression spring and intake valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13715 2.REMOVE EXHAUST VALVE

a.
A366792E01
0.417,0.271 0.542,0.271 false 2.99,1.698 2.885,1.698 2.885,1.698 2.792,1.594 true 0.104,0.188 0.438,0.396 0.333,0.208 10 false SST 3.031,1.615 3.365,1.823 0.333,0.208 10 false SST

Using SST, compress the compression spring and remove the valve spring retainer locks.

SST
09202-70020  (09202-01010, 09202-01020)
09202-00021  


b.

Remove the valve spring retainer, compression spring and exhaust valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13711E 3.REMOVE VALVE STEM OIL SEAL

a.
A164328

Using needle-nose pliers, remove the valve stem oil seals.


Hide 13734 4.REMOVE VALVE SPRING SEAT

a.
A164329

Using compressed air and a magnet hand, remove the valve spring seats by blowing air onto them.


Hide 11117E 5.REMOVE NO. 1 STRAIGHT SCREW PLUG

A145550E04
0.065,0.048 0.250,0.203 0.185,0.155 10 *A 0.065,2.374 0.250,2.528 0.185,0.155 10 *B

NOTICE:

If coolant leaks from a No. 1 straight screw plug or a plug is corroded, replace it.


a.

Using a 10 mm hexagon wrench, remove the 6 No. 1 straight screw plugs and 6 gaskets.

Text in Illustration
*A for Bank 2
*B for Bank 1


Hide 11117F 6.REMOVE NO. 2 STRAIGHT SCREW PLUG

A164330E03
0.064,0.029 0.249,0.183 0.185,0.155 10 *A 0.064,2.511 0.249,2.666 0.185,0.155 10 *B

NOTICE:

If coolant leaks from a No. 2 straight screw plug or a plug is corroded, replace it.


a.

Using a 14 mm hexagon wrench, remove the 2 No. 2 straight screw plugs and 2 gaskets.

Text in Illustration
*A for Bank 2
*B for Bank 1


Hide 7.REMOVE STUD BOLT

NOTICE:

If a stud bolt is deformed or its threads are damaged, replace it.