Home › Engine / Hybrid System › 3UR-FE (ENGINE MECHANICAL) › CYLINDER HEAD › from 2016.08
RM2660E _51 Engine / Hybrid System _052777 3UR-FE ENGINE MECHANICAL _0255051 CYLINDER HEAD A

3UR-FE ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13711 1.REMOVE INTAKE VALVE

a.
A366791E01
2.917,0.323 3.01,0.323 false 0.438,0.656 0.563,0.656 0.563,0.656 0.667,0.844 true 0.094,0.573 0.448,0.771 0.354,0.198 10 false SST 3.063,0.229 3.417,0.427 0.354,0.198 10 true SST

Using SST and wooden blocks, compress the compression spring and remove the valve spring retainer locks.

SST
09202-70020  (09202-01010, 09202-01020)
09202-00021  


b.

Remove the retainer, compression spring and valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13715 2.REMOVE EXHAUST VALVE

a.
A366792E01
0.417,0.271 0.542,0.271 false 2.99,1.698 2.885,1.698 2.885,1.698 2.792,1.594 true 0.104,0.188 0.438,0.396 0.333,0.208 10 false SST 3.031,1.615 3.365,1.823 0.333,0.208 10 false SST

Using SST and wooden blocks, compress the compression spring and remove the valve spring retainer locks.

SST
09202-70020  (09202-01010, 09202-01020)
09202-00021  


b.

Remove the retainer, compression spring and valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13711A 3.REMOVE VALVE STEM OIL SEAL

a.
A164328

Using needle-nose pliers, remove the oil seals.


Hide 13734 4.REMOVE VALVE SPRING SEAT

a.
A164329

Using compressed air and a magnet hand, remove the valve spring seat by blowing air onto it.


Hide 11117E 5.REMOVE NO. 1 STRAIGHT SCREW PLUG

A174132E05
0.125,0.052 0.365,0.26 0.24,0.208 10 false *A 0.125,2.26 0.438,2.5 0.313,0.24 10 false *B

NOTICE:

If water leaks from the No. 1 straight screw plug or the plug is corroded, replace it.


a.

Using a 10 mm hexagon wrench, remove the 6 screw plugs and 6 gaskets.

Text in Illustration
*A LH
*B RH


Hide 11117F 6.REMOVE NO. 2 STRAIGHT SCREW PLUG

A174133E05
0.063,0.063 0.354,0.333 0.292,0.271 10 false *A 0.063,2.365 0.438,2.615 0.375,0.25 10 false *B

NOTICE:

If water leaks from the No. 2 straight screw plug or the plug is corroded, replace it.


a.

Using a 14 mm hexagon wrench, remove the 2 screw plugs and 2 gaskets.

Text in Illustration
*A LH
*B RH


Hide 7.REMOVE STUD BOLT

NOTICE:

If the stud bolt is deformed or its threads are damaged, replace it.