Home › Engine / Hybrid System › 3UR-FE (ENGINE MECHANICAL) › CYLINDER HEAD › from 2016.08
RM2660E _51 Engine / Hybrid System _052777 3UR-FE ENGINE MECHANICAL _0255051 CYLINDER HEAD A

3UR-FE ENGINE MECHANICAL  CYLINDER HEAD  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL STUD BOLT

NOTICE:

If the stud bolt is deformed or its threads are damaged, replace it.


a.

Using E7 and E8 "TORX" socket wrenches, install the stud bolts.

Torque:
for stud bolts A, B, C and D : 9.0 N*m (92 kgf*cm, 80 in.*lbf)

U162971E02
0.885,5.469 1.146,5.115 1.146,5.115 1.229,5.115 false 0.885,6.281 1.24,6.448 1.24,6.448 1.24,6.521 false 2.75,5.302 2.646,5.302 2.646,5.302 2.458,5.688 false 2.479,6.302 2.771,6.458 2.771,6.458 2.771,6.521 false 4.125,6.302 4.406,6.448 4.406,6.448 4.406,6.531 false 5.635,6.302 5.885,6.375 5.885,6.375 5.885,6.479 false 5.615,5.969 5.833,5.635 5.833,5.635 5.938,5.635 false 4.417,5.5 4.333,5.5 4.333,5.5 4.115,5.927 false 2.896,1 2.896,1.438 false 4.323,0.896 4.323,1.396 false 1.042,2.74 1.042,2.948 false 1.313,2.448 1.313,2.958 false 1.594,2.76 1.594,2.979 false 1.875,2.458 1.875,2.969 false 2.167,2.74 2.167,2.969 false 2.427,2.74 2.427,2.969 false 1.76,2.958 1.76,3.146 false 4.646,2.76 4.646,2.969 false 4.906,2.469 4.906,2.969 false 5.198,2.781 5.198,2.969 false 5.458,2.771 5.458,2.969 false 5.781,2.458 5.781,2.969 false 6.021,2.458 6.021,2.969 false 5.365,2.969 5.365,3.156 false 6.104,4.281 6.604,4.281 false 6.198,4.01 6.417,4.01 6.417,4.01 6.417,4.281 false 0.771,3.875 0.948,3.875 0.948,3.875 1.188,3.948 false 1.198,4.281 0.781,4.281 false 0.969,4.229 0.969,3.958 0.969,3.958 1.104,3.958 false 0.448,0.115 1.719,0.417 1.271,0.302 10 false *A 0.448,1.813 1.823,2.031 1.375,0.219 10 false *B 0.448,3.406 2.135,3.656 1.688,0.25 10 false *C 1.25,5.042 2.385,5.229 1.135,0.188 10 false 12 mm (0.472 in.) 1.406,5.708 2.083,6.073 0.677,0.365 10 false 52 mm (2.05 in.) 2.448,6.542 3.604,6.75 1.156,0.208 10 false 13 mm (0.512 in.) 2.792,5.24 4.063,5.396 1.271,0.156 10 false 24 mm (0.945 in.) 2.938,5.792 3.594,6.156 0.656,0.365 10 false 45 mm (1.77 in.) 4.458,5.427 5.594,5.583 1.135,0.156 10 false 20 mm (0.787 in.) 5.969,5.563 7.125,5.719 1.156,0.156 10 false 14 mm (0.551 in.) 4.573,5.875 5.24,6.25 0.667,0.375 10 false 35 mm (1.38 in.) 6.104,5.854 6.792,6.219 0.688,0.365 10 false 29 mm (1.14 in.) 0.583,6.531 0.74,6.698 0.156,0.167 10 false A 0.646,3.76 0.802,3.927 0.156,0.167 10 false A 2.188,6.531 2.323,6.708 0.135,0.177 10 false B 1.708,3.167 1.844,3.344 0.135,0.177 10 false C 3.823,6.531 3.969,6.729 0.146,0.198 10 false C 2.854,1.448 3,1.646 0.146,0.198 10 false B 5.333,6.521 5.469,6.667 0.135,0.146 10 false D 0.646,4.156 0.781,4.302 0.135,0.146 10 false D 6.635,4.219 6.771,4.365 0.135,0.146 10 false D 0.896,6.531 2.031,6.719 1.135,0.188 10 false 12 mm (0.472 in.) 4.094,6.521 5.25,6.729 1.156,0.208 10 false 13 mm (0.512 in.) 5.573,6.458 6.729,6.667 1.156,0.208 10 false 13 mm (0.512 in.) 4.281,1.438 4.427,1.635 0.146,0.198 10 false B 5.313,3.188 5.448,3.365 0.135,0.177 10 false C 4.125,0.115 6,0.365 1.875,0.25 10 false *D 4.052,1.729 5.969,1.99 1.917,0.26 10 false *E 4.146,3.396 5.885,3.646 1.74,0.25 10 false *F

Text in Illustration
*A LH for Intake Side *B LH for Exhaust Side
*C LH for Front Side *D RH for Intake Side
*E RH for Exhaust Side *F RH for Front Side


Hide 11117F 2.INSTALL NO. 2 STRAIGHT SCREW PLUG

A174133E07
0.177,0.135 0.438,0.354 0.26,0.219 10 false *A 0.208,2.365 0.438,2.573 0.229,0.208 10 false *B

NOTICE:

If water leaks from the No. 2 straight screw plug or the plug is corroded, replace it.


a.

Using a 14 mm hexagon wrench, install 2 new gaskets and the 2 straight screw plugs.

Torque:
85 N*m (867 kgf*cm, 63 ft.*lbf)

Text in Illustration
*A LH
*B RH


Hide 11117E 3.INSTALL NO. 1 STRAIGHT SCREW PLUG

A174132E06
0.125,0.229 0.469,0.469 0.344,0.24 10 false *A 0.156,2.313 0.469,2.552 0.313,0.24 10 false *B

NOTICE:

If water leaks from the No. 1 straight screw plug or the plug is corroded, replace it.


a.

Using a 10 mm hexagon wrench, install 6 new gaskets and the 6 straight screw plugs.

Torque:
44 N*m (449 kgf*cm, 32 ft.*lbf)

Text in Illustration
*A LH
*B RH


Hide 13734 4.INSTALL VALVE SPRING SEAT

a.

Install the valve spring seats to the cylinder head.


Hide 13711A 5.INSTALL VALVE STEM OIL SEAL

a.
A385329E01
1.052,1.375 1.26,1.271 1.26,1.271 1.406,1.271 false 1.917,0.99 2.042,0.99 2.042,0.99 2.302,1.302 false 0.635,0.24 0.948,0.438 0.313,0.198 10 false *A 2.542,0.24 2.854,0.438 0.313,0.198 10 false *B 1.427,1.188 1.74,1.385 0.313,0.198 10 false *1 1.729,0.917 2.042,1.115 0.313,0.198 10 false *2

Apply a light coat of engine oil to new oil seals.

Text in Illustration
*A Intake Side
*B Exhaust Side
*1 Brown
*2 Gray

NOTICE:

Pay attention when installing the intake and exhaust oil seals. For example, installing the intake oil seal into the exhaust side or installing the exhaust oil seal into the intake side can cause installation problems later.


HINT:

The intake valve oil seals are brown and the exhaust valve oil seals are gray.



b.
A165065E06
0.573,1.583 0.823,1.583 0.823,1.583 1.573,1.104 false 0.167,1.5 0.51,1.688 0.344,0.188 10 false SST 0.896,2.323 1.094,2.521 0.198,0.198 10 false *a 2.365,2.313 2.563,2.49 0.198,0.177 10 false *b

Using SST, push in the oil seals.

SST
09201-41020  

Text in Illustration
*a CORRECT
*b INCORRECT

NOTICE:

Failure to use SST will cause the seal to be damaged or improperly seated.



Hide 13711 6.INSTALL INTAKE VALVE

a.
A385330E01
2.625,1.552 2.938,1.75 0.313,0.198 10 false *a

Apply plenty of engine oil to the tip area of the intake valve shown in the illustration.

Text in Illustration
*a 40 mm (1.57 in.) or more


b.
A366793E02
0.531,0.354 0.771,0.563 0.24,0.208 10 false *a 0.531,1.531 0.781,1.75 0.25,0.219 10 false *b

Install the intake valve, compression spring and valve spring retainer to the cylinder head.

Text in Illustration
*a Narrow
*b Wide

NOTICE:
·

Install the same parts in the same combination to their original locations.

·

Install the inner compression spring to the wide end of the cylinder head sub-assembly.




c.
A366791E01
2.917,0.323 3.01,0.323 false 0.438,0.656 0.563,0.656 0.563,0.656 0.667,0.844 true 0.094,0.573 0.448,0.771 0.354,0.198 10 false SST 3.063,0.229 3.417,0.427 0.354,0.198 10 true SST

Using SST and wooden blocks, compress the spring and install the retainer locks.

SST
09202-70020  (09202-01010, 09202-01020)
09202-00021  


d.
A366795

Using a plastic-faced hammer, lightly tap the valve stem tip to ensure a proper fit.

NOTICE:
·

Do not damage the valve stem tip.

·

Be careful not to damage the retainer.




Hide 13715 7.INSTALL EXHAUST VALVE

a.
A385330E01
2.625,1.552 2.938,1.75 0.313,0.198 10 false *a

Apply plenty of engine oil to the tip area of the exhaust valve shown in the illustration.

Text in Illustration
*a 40 mm (1.57 in.) or more


b.
A366794E02
0.708,0.344 0.948,0.573 0.24,0.229 10 false *a 0.708,1.51 0.948,1.75 0.24,0.24 10 false *b

Install the exhaust valve, compression spring and valve spring retainer to the cylinder head.

Text in Illustration
*a Narrow
*b Wide

NOTICE:
·

Install the same parts in the same combination to their original locations.

·

Install the inner compression spring to the wide end of the cylinder head sub-assembly.




c.
A366792E01
0.417,0.271 0.542,0.271 false 2.99,1.698 2.885,1.698 2.885,1.698 2.792,1.594 true 0.104,0.188 0.438,0.396 0.333,0.208 10 false SST 3.031,1.615 3.365,1.823 0.333,0.208 10 false SST

Using SST and wooden blocks, compress the spring and install the retainer locks.

SST
09202-70020  (09202-01010, 09202-01020)
09202-00021  


d.
A366796

Using a plastic-faced hammer, lightly tap the valve stem tip to ensure a proper fit.

NOTICE:
·

Do not damage the valve stem tip.

·

Be careful not to damage the retainer.