Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT › from 2016.08
RM2660E _59 Vehicle Exterior _052852 DOOR / HATCH _0255750 BACK DOOR SUPPORT A

DOOR / HATCH  BACK DOOR SUPPORT  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:
·

While holding the back door, remove the back door support.

·

Do not touch the extendable portion of the rod to prevent foreign objects from attaching to the rod surface.

·

Do not push sideways on the rod because the rod may bend.



HINT:
·

Use the same procedures for the RH side and LH side.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 68960 1.REMOVE BACK DOOR STAY ASSEMBLY LH

a.
B453529

Remove the bolt in the order shown in the illustration.

CAUTION:

Remove the door stay while supporting the back door with one hand.



b.
B453528C01
2.583,0.75 1.917,0.333 1.917,0.333 1.583,0.333 true 1.354,0.25 1.667,0.406 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver, remove the stop ring as indicated by the arrows in the order shown in the illustration.

HINT:

Tape the screwdriver tip before use.



Hide 68946 2.REMOVE BACK DOOR DAMPER STAY BRACKET UPPER LH

a.
B453533

Remove the 2 bolts and remove back door damper stay bracket upper LH.


Hide 68961F 3.REMOVE BACK DOOR STAY BOLT

a.
B453531C01
1.833,0.917 1.583,0.333 1.583,0.333 1.25,0.333 true 1.021,0.26 1.333,0.417 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver, remove the stop ring as indicated by the arrows in the order shown in the illustration.

HINT:

Tape the screwdriver tip before use.



b.

Release the ball joint and remove the back door stay bolt.