Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
58959B
1.INSTALL CONSOLE COMPARTMENT DOOR CUSHION
Install 2 new console compartment door cushions.
55633A
2.INSTALL NO. 1 INSTRUMENT PANEL CUP HOLDER SUPPORT
Install the No. 1 instrument panel cup holder support.
55407C
3.INSTALL LOWER INSTRUMENT COVER SUB-ASSEMBLY
Install the lower instrument cover sub-assembly with the 5 screws.
58971
4.INSTALL CONSOLE COMPARTMENT DOOR LOCK
Install the console compartment door lock with the 2 screws.
58907
5.INSTALL CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY
Install the console compartment door hinge sub-assembly with the 4 screws.
Attach the 12 claws to install the inner console door.
Install the upper console box with the 4 screws.
58908A
6.INSTALL CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY
Install the console compartment door lock sub-assembly with the 2 screws.
Install the lower console box with the 2 screws.
58905
7.INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
Install the console compartment door sub-assembly with the 4 screws.
58993
8.INSTALL REAR CONSOLE BOX MOUNTING BRACKET (w/o Telematics Transceiver)
Install the rear console box mounting bracket with the 4 bolts.
58825A
9.INSTALL CONSOLE BOX POCKET
all the console box pocket.
55548B
10.INSTALL INSTRUMENT PANEL HOLE COVER
Attach the 7 claws to install the instrument panel hole cover.
Install the 2 screws.
55549C
11.INSTALL REAR COOLER SWITCH HOLE COVER (w/o Rear Cooler)
Attach the 5 claws to install the rear cooler switch hole cover.
Install the 4 screws.
55900
12.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (w/ Rear Cooler)
55900D
13.INSTALL NO. 2 AIR CONDITIONING CONTROL ASSEMBLY (w/ Rear Air Conditioning System)