Home › Drivetrain › AC60F (AUTOMATIC TRANSMISSION / TRANSAXLE) › PARK / NEUTRAL POSITION SWITCH › from 2017.08
RM2660E _52 Drivetrain _066407 AC60F AUTOMATIC TRANSMISSION / TRANSAXLE _0323659 PARK / NEUTRAL POSITION SWITCH N

AC60F AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  ADJUSTMENT  


PROCEDURE

Hide 84540 1.ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.

While pushing the shift lock release button, move the shift lever to N.


b.

Remove the bolt of the park/neutral position switch assembly.


c.

Clean the bolt and bolt hole.


d.

Apply adhesive to 2 or 3 threads on the end of the bolt.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent



e.
C380066C01
2.229,0.896 2.417,0.333 2.417,0.333 2.615,0.333 true 0.771,0.896 1.021,0.896 1.021,0.896 1.844,1.521 true 2.635,0.229 2.865,0.458 0.229,0.229 10 false *a 0.583,0.813 0.771,1.031 0.188,0.219 10 false *b
*a Neutral Basic Line
*b Groove


Align the neutral basic line with the groove as shown in the illustration.


f.

Hold the park/neutral position switch assembly in position and install the bolt.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


g.

After the adjustment, perform the park/neutral position switch assembly operation check.

Click hereDrivetrain>AC60F (AUTOMATIC TRANSMISSION / TRANSAXLE)>PARK / NEUTRAL POSITION SWITCH>ON-VEHICLE INSPECTION