Home › Drivetrain › AC60F (AUTOMATIC TRANSMISSION / TRANSAXLE) › PARK / NEUTRAL POSITION SWITCH › from 2017.08
RM2660E _52 Drivetrain _066407 AC60F AUTOMATIC TRANSMISSION / TRANSAXLE _0323659 PARK / NEUTRAL POSITION SWITCH A

AC60F AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  REMOVAL  


PROCEDURE

Hide 33702B 1.DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

a.

Move the shift lever to N.


b.
C380061

Remove the clip and pin, and disconnect the floor shift gear shifting rod sub-assembly from the transmission control shaft lever RH.


Hide 84540 2.REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.

Disconnect the park/neutral position switch assembly connector.


b.
C380062

Remove the nut, spring washer and transmission control shaft lever RH.


c.

Remove the collar and transmission control rod bush from the transmission control shaft lever RH.


d.
C380063

Using a screwdriver, bend the tabs of the lock washer.


e.
C380064

Remove the lock nut and lock washer.


f.
C380065

Remove the bolt and park/neutral position switch assembly.

HINT:

Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch assembly as the detent spring may become detached from the manual valve lever shaft.