Home › Drivetrain › AC60F (AUTOMATIC TRANSMISSION / TRANSAXLE) › SHIFT LEVER › from 2017.08
RM2660E _52 Drivetrain _066407 AC60F AUTOMATIC TRANSMISSION / TRANSAXLE _0323661 SHIFT LEVER G

AC60F AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT SHIFT LEVER POSITION

a.

When moving the shift lever from P to R with the engine switch on (IG) and the brake pedal depressed, make sure that it moves smoothly and correctly into position.


b.

Check that the shift lever does not stop when moving the shift lever from R to P, and check that the shift lever does not stick when moving the shift lever from D to S.


c.

Start the engine and make sure that the vehicle moves forward after moving the shift lever from N to D and moves rearward after moving the shift lever to R.

If the operation cannot be performed as specified, inspect the park/neutral position switch assembly and check the shift lever assembly installation condition.


Hide 2.CHECK SHIFT LOCK OPERATION

a.

Move the shift lever to P.


b.

Turn the engine switch off.


c.

Check that the shift lever cannot be moved from P.


d.

Turn the engine switch on (IG), depress the brake pedal and check that the shift lever can be moved to other positions.

If the operation cannot be done as specified, inspect the shift lever assembly and shift lock control ECU sub-assembly.


Hide 3.CHECK SHIFT LOCK RELEASE BUTTON OPERATION

a.

When operating the shift lever with the shift lock release button pressed, check that the lever can be moved to any position.

If the operation cannot be performed as specified, check the shift lever assembly.


Hide 85903 4.CHECK SHIFT LOCK CONTROL ECU SUB-ASSEMBLY

a.
C113154E35
1.021,1.896 0.802,0.958 false 1.031,2.344 0.823,2.906 false 1.854,1.896 2.021,0.979 false 0.396,0.75 0.75,0.948 0.354,0.198 10 false STP 0.688,3.01 0.938,3.177 0.25,0.167 10 false IG 2.031,0.75 2.24,0.927 0.208,0.177 10 false E 0.094,0.063 0.313,0.313 0.219,0.25 10 false *a

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
12 (IG) - 3 (E) Engine switch on (IG) 11 to 14 V
Engine switch off Below 1 V
6 (STP) - 3 (E) Brake pedal depressed 11 to 14 V
Brake pedal released Below 1 V


Text in Illustration
*a Component with harness connected
(Shift Lock Control ECU)

HINT:

Do not disconnect the shift lock control ECU connector.



b.
C113154E36
1.865,1.917 2.271,0.958 2.271,0.958 2.448,0.958 false 2.51,0.865 2.719,1.042 0.208,0.177 10 false E 0.146,0.063 0.521,0.281 0.375,0.219 10 false *a

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Value
3 (E) - Body ground Always Below 1 Ω


Text in Illustration
*a Component with harness connected
(Shift Lock Control ECU)

HINT:

Do not disconnect the shift lock control ECU connector.



c.

Disconnect the shift lock solenoid connector from the shift lock control ECU sub-assembly.


d.
C172429E06
2.323,1.844 2.563,0.885 2.563,0.885 2.75,0.885 false 1.927,1.854 1.604,0.885 1.604,0.885 1.396,0.885 false 0.146,0.125 0.594,0.323 0.448,0.198 10 false *a 2.813,0.781 3.271,0.979 0.458,0.198 10 false SLS+ 0.948,0.813 1.427,1 0.479,0.188 10 false SLS-

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
1 (SLS+) - 2 (SLS-) Engine switch off Below 1 V
1 (SLS+) - 2 (SLS-) Engine switch on (IG) Below 1 V
Engine switch on (IG) and brake pedal depressed 11 to 14 V


Text in Illustration
*a Component with harness connected
(Shift Lock Control ECU)

HINT:

Do not disconnect the shift lock control ECU connector.


If the result is not as specified, replace the shift lever assembly.