Home › Engine / Hybrid System › 3UR-FE (ENGINE CONTROL) › SFI SYSTEM(w/ Secondary Air Injection System) › from 2017.08
RM2660E _51 Engine / Hybrid System _052775 3UR-FE ENGINE CONTROL _0327320 SFI SYSTEM(w/ Secondary Air Injection System) U

3UR-FE ENGINE CONTROL  SFI SYSTEM(w/ Secondary Air Injection System)  TERMINALS OF ECM  


CHECK ECM


U163136E04
2.792,0.344 3.083,0.521 0.292,0.177 10 false C45 5.448,0.354 5.792,0.531 0.344,0.177 10 false A38

HINT:

The standard normal voltage between each pair of ECM terminals is shown in the table below. The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard normal voltage for that pair of terminals, displayed in the Specified Condition column. The illustration above can be used as a reference to identify the ECM terminal locations.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A38-1 (BATT) - C45-81 (E1) L - W-B Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
C45-104 (+BM) - C45-81 (E1) P - W-B Power source of throttle actuator Always 11 to 14 V
A38-4 (IGSW) - C45-81 (E1) B - W-B Engine switch Engine switch on (IG) 11 to 14 V
A38-2 (+B) - C45-81 (E1) B - W-B Power source of ECM Engine switch on (IG) 11 to 14 V
A38-3 (+B2) - C45-81 (E1) B - W-B Power source of ECM Engine switch on (IG) 11 to 14 V
C45-6 (OC1+) - C45-5 (OC1-) B - B Camshaft oil control valve (OCV) (for Intake Side of Bank 1) Idling Pulse generation
(See waveform 1)
C45-4 (OC2+) - C45-3 (OC2-) L - R Camshaft oil control valve (OCV) (for Intake Side of Bank 2) Idling Pulse generation
(See waveform 1)
C45-2 (OE1+) - C45-1 (OE1-) L - L Camshaft oil control valve (OCV) (for Exhaust Side of Bank 1) Idling Pulse generation
(See waveform 1)
C45-24 (OE2+) - C45-47 (OE2-) L - L Camshaft oil control valve (OCV) (for Exhaust Side of Bank 2) Idling Pulse generation
(See waveform 1)
A38-6 (MREL) - C45-81 (E1) V - W-B EFI MAIN NO. 1 relay Engine switch on (IG) 11 to 14 V
C45-68 (VG) - C45-70 (E2G) L - G Mass air flow meter Idling, Shift lever in P or N, A/C switch off 0.5 to 3.0 V
C45-71 (THA) - C45-81 (E1) P - W-B Intake air temperature sensor Idling, Intake air temperature 20°C (68°F) 0.5 to 3.4 V
C45-122 (THW) - C45-123 (ETHW) LG - BR Engine coolant temperature sensor Idling, Engine coolant temperature 80°C (176°F) 0.2 to 1.0 V
C45-125 (VCTA) - C45-124 (ETA) P - B Power source of throttle position sensor (specific voltage) Engine switch on (IG) 4.5 to 5.5 V
C45-126 (VTA1) - C45-124 (ETA) R - B Throttle position sensor (for engine control) Engine switch on (IG),
Accelerator pedal fully released
0.5 to 1.1 V
Engine switch on (IG),
Accelerator pedal fully depressed
3.2 to 4.8 V
C45-101 (VTA2) - C45-124 (ETA) P - B Throttle position sensor (for sensor malfunction detection) Engine switch on (IG),
Accelerator pedal fully released
2.1 to 3.1 V
Engine switch on (IG),
Accelerator pedal fully depressed
4.6 to 5.0 V
A38-53 (VPA) - A38-54 (EPA) R - W Accelerator pedal position sensor (for engine control) Engine switch on (IG),
Accelerator pedal released
0.5 to 1.1 V
Engine switch on (IG),
Accelerator pedal fully depressed
2.6 to 4.5 V
A38-56 (VPA2) - A38-57 (EPA2) GR - BE Accelerator pedal position sensor (for sensor malfunctioning detection) Engine switch on (IG),
Accelerator pedal released
1.2 to 2.0 V
Engine switch on (IG),
Accelerator pedal fully depressed
3.4 to 4.75 V
A38-55 (VCPA) - A38-54 (EPA) L - W Power source of accelerator pedal position sensor (for VPA) Engine switch on (IG) 4.5 to 5.5 V
A38-58 (VCP2) - A38-57 (EPA2) V - BE Power source of accelerator pedal position sensor (for VPA2) Engine switch on (IG) 4.5 to 5.5 V
C45-22 (HA1A) - C45-23 (E04) L - W-B A/F sensor heater
bank 1 sensor 1
Idling with warm engine Pulse generation
(See waveform 2)
Engine switch on (IG) 11 to 14 V
C45-45 (HA2A) - C45-46 (E05) G - W-B A/F sensor heater
bank 2 sensor 1
Idling with warm engine Pulse generation
(See waveform 2)
Engine switch on (IG) 11 to 14 V
C45-98 (A1A+) - C45-81 (E1) G - W-B A/F sensor
bank 1 sensor 1
Engine switch on (IG) 3.3 V*
C45-97 (A1A-) - C45-81 (E1) R - W-B A/F sensor
bank 1 sensor 1
Engine switch on (IG) 2.9 V*
C45-121 (A2A+) - C45-81 (E1) P - W-B A/F sensor
bank 2 sensor 1
Engine switch on (IG) 3.3 V*
C45-120 (A2A-) - C45-81 (E1) L - W-B A/F sensor
bank 2 sensor 1
Engine switch on (IG) 2.9 V*
C45-21 (HT1B) - C45-43 (E02) G - BR Heated oxygen sensor heater
bank 1 sensor 2
Idling Below 3.0 V
Engine switch on (IG) 11 to 14 V
C45-44 (HT2B) - C45-43 (E02) B - BR Heated oxygen sensor heater
bank 2 sensor 2
Idling Below 3.0 V
Engine switch on (IG) 11 to 14 V
C45-96 (OX1B) - C45-95 (EX1B) G - L Heated oxygen sensor
bank 1 sensor 2
Engine speed maintained at 2500 rpm for 2 minutes after warming up sensor Pulse generation
(See waveform 3)
C45-119 (OX2B) - C45-118 (EX2B) R - W Heated oxygen sensor
bank 2 sensor 2
Engine speed maintained at 2500 rpm for 2 minutes after warming up sensor Pulse generation
(See waveform 3)
C45-86 (#10) - C45-41 (E01) V - W-B Fuel injector Engine switch on (IG) 11 to 14 V
Idling Pulse generation
(See waveform 4)
C45-109 (#20) - C45-41 (E01) L - W-B Fuel injector Engine switch on (IG) 11 to 14 V
Idling Pulse generation
(See waveform 4)
C45-85 (#30) - C45-41 (E01) V - W-B Fuel injector Engine switch on (IG) 11 to 14 V
Idling Pulse generation
(See waveform 4)
C45-108 (#40) - C45-41 (E01) L - W-B Fuel injector Engine switch on (IG) 11 to 14 V
Idling Pulse generation
(See waveform 4)
C45-84 (#50) - C45-41 (E01) G - W-B Fuel injector Engine switch on (IG) 11 to 14 V
Idling Pulse generation
(See waveform 4)
C45-107 (#60) - C45-41 (E01) R - W-B Fuel injector Engine switch on (IG) 11 to 14 V
Idling Pulse generation
(See waveform 4)
C45-83 (#70) - C45-41 (E01) W - W-B Fuel injector Engine switch on (IG) 11 to 14 V
Idling Pulse generation
(See waveform 4)
C45-106 (#80) - C45-41 (E01) B - W-B Fuel injector Engine switch on (IG) 11 to 14 V
Idling Pulse generation
(See waveform 4)
C45-94 (KNK1) - C45-93 (EKNK) R - G Knock sensor Engine speed maintained at 4000 rpm after warming up engine Pulse generation
(See waveform 5)
C45-117 (KNK2) - C45-116 (EKN2) W - B Knock sensor Engine speed maintained at 4000 rpm after warming up engine Pulse generation
(See waveform 5)
C45-92 (KNK3) - C45-91 (EKN3) W - B Knock sensor Engine speed maintained at 4000 rpm after warming up engine Pulse generation
(See waveform 5)
C45-115 (KNK4) - C45-114 (EKN4) R - G Knock sensor Engine speed maintained at 4000 rpm after warming up engine Pulse generation
(See waveform 5)
C45-67 (VV1+) - C45-88 (VV1-) R - P Variable valve timing (VVT) sensor (for Intake Side of Bank 1) Idling Pulse generation
(See waveform 6)
C45-112 (VV2+) - C45-111 (VV2-) R - G Variable valve timing (VVT) sensor (for Intake Side for Bank 2) Idling Pulse generation
(See waveform 6)
C45-90 (EV1+) - C45-88 (VV1-) R - P Variable valve timing (VVT) sensor (for Exhaust Side of Bank 1) Idling Pulse generation
(See waveform 16)
C45-113 (EV2+) - C45-111 (VV2-) R - G Variable valve timing (VVT) sensor (for Exhaust Side of Bank 2) Idling Pulse generation
(See waveform 16)
C45-64 (VCNE) - C45-81 (E1) L - W-B Power source of crankshaft position sensor Engine switch on (IG) 4.5 to 5.5 V
C45-66 (NE+) - C45-65 (NE-) W - G-W Crankshaft position sensor Idling Pulse generation
(See waveform 6)
C45-37 (IGT1) - C45-81 (E1) R-B - W-B Ignition coil (ignition signal) Idling Pulse generation
(See waveform 7)
C45-36 (IGT2) - C45-81 (E1) G-Y - W-B Ignition coil (ignition signal) Idling Pulse generation
(See waveform 7)
C45-35 (IGT3) - C45-81 (E1) B - W-B Ignition coil (ignition signal) Idling Pulse generation
(See waveform 7)
C45-34 (IGT4) - C45-81 (E1) L - W-B Ignition coil (ignition signal) Idling Pulse generation
(See waveform 7)
C45-33 (IGT5) - C45-81 (E1) R-Y - W-B Ignition coil (ignition signal) Idling Pulse generation
(See waveform 7)
C45-32 (IGT6) - C45-81 (E1) G - W-B Ignition coil (ignition signal) Idling Pulse generation
(See waveform 7)
C45-31 (IGT7) - C45-81 (E1) G - W-B Ignition coil (ignition signal) Idling Pulse generation
(See waveform 7)
C45-30 (IGT8) - C45-81 (E1) G - W-B Ignition coil (ignition signal) Idling Pulse generation
(See waveform 7)
C45-54 (IGF1) - C45-81 (E1) G - W-B Ignition coil (ignition confirmation signal) Engine switch on (IG) 4.5 to 5.5 V
Idling Pulse generation
(See waveform 7)
C45-53 (IGF2) - C45-81 (E1) R - W-B Ignition coil (ignition confirmation signal) Engine switch on (IG) 4.5 to 5.5 V
Idling Pulse generation
(See waveform 7)
C45-82 (PRG) - C45-81 (E1) L - W-B Purge VSV Engine switch on (IG) 11 to 14 V
Idling Pulse generation
(See waveform 8)
A38-44 (SPD) - C45-81 (E1) L - W-B Speed signal from combination meter Driving at 20 km/h (12 mph) Pulse generation
(See waveform 9)
A38-16 (STA) - C45-81 (E1) R - W-B Starter signal Cranking 5.5 V or higher
C45-48 (NSW) - C45-81 (E1) L - W-B Park/neutral position switch Engine switch on (IG), Shift lever in other than P and N 11 to 14 V
Engine switch on (IG), Shift lever in P or N Below 3.0 V
A38-7 (STP) - C45-81 (E1) R - W-B Stop light switch Brake pedal depressed 7.5 to 14 V
Brake pedal released Below 1.5 V
A38-8 (ST1-) - C45-81 (E1) P - W-B Stop light switch
(opposite to STP terminal)
Engine switch on (IG),
Brake pedal depressed
Below 1.5 V
Engine switch on (IG),
Brake pedal released
7.5 to 14 V
C45-20 (M+) - C45-18 (ME01) R - W-B Throttle actuator Idling with warm engine Pulse generation
(See waveform 10)
C45-19 (M-) - C45-18 (ME01) G - W-B Throttle actuator Idling with warm engine Pulse generation
(See waveform 11)
A38-50 (FPC) - C45-81 (E1) W - W-B Fuel pump control Engine switch on (IG) Below 1.5 V
A38-43 (TC) - C45-81 (E1) V - W-B Terminal TC of DLC3 Engine switch on (IG) 11 to 14 V
A38-37 (TACH) - C45-81 (E1) W - W-B Engine speed Idling Pulse generation
(See waveform 12)
C45-87 (VCV1) - C45-74 (EAIP) L - BR Power source for sensor (specific voltage) Engine switch on (IG) 4.75 to 5.25 V
C45-110 (VCV2) - C45-74 (EAIP) L - BR Power source for sensor (specific voltage) Engine switch on (IG) 4.5 to 5.5 V
A38-11 (CANH) - C45-81 (E1) V - W-B CAN communication line Engine switch on (IG) Pulse generation
(See waveform 13)
A38-19 (CANL) - C45-81 (E1) W - W-B CAN communication line Engine switch on (IG) Pulse generation
(See waveform 14)
A38-10 (CANP) - C45-81 (E1) R - W-B CAN communication line Engine switch on (IG) Pulse generation
(See waveform 13)
A38-18 (CANN) - C45-81 (E1) W - W-B CAN communication line Engine switch on (IG) Pulse generation
(See waveform 14)
C45-105 (ACIS) - C45-81 (E1) L - W-B VSV for ACIS (Acoustic Control Induction System) operation signal Engine switch on (IG) 11 to 14 V
C45-89 (G2+) - C45- 88 (VV1-) G - P Camshaft position sensor Idling Pulse generation
(See waveform 15)
C45-76 (PSP) - C45-81 (E1) G - W-B Power steering oil pressure sensor Engine switch on (IG) 0.33 to 3.6 V
A38-17 (ACT) - C45-81 (E1) G - W-B A/C signal A/C on 11 to 14 V
A/C off Below 1.5 V
A38-9 (AC1) - C45-81 (E1) L - W-B A/C signal A/C on Below 1.5 V
A/C off 11 to 14 V
A38-41 (NEO) - C45-81 (E1) L - W-B Engine speed signal Idle after engine warmed up Pulse generation
(See waveform 17)
C45-61 (AIRV) - C45-81 (E1) BR - W-B Air switching valve for secondary air injection system Engine switch on (IG) 11 to 14 V
C45-63 (AIRP) - C45-81 (E1) P - W-B Air pump control Engine switch on (IG) 11 to 14 V
C45-52 (AIDI) - C45-81 (E1) G - W-B Diagnostic information signal for air injection system Air injection system operates Pulse generation
(See waveform 18)
A45-60 (ARV2) - C45-81 (E1) R - W-B Air switching valve for secondary air injection system Engine switch on (IG) 11 to 14 V
A45-60 (ARV2) - C45-81 (E1) P - W-B Air pump control Engine switch on (IG) 11 to 14 V
C45-51 (AID2) -C45-81 (E1) L - W-B Diagnostic information signal for air injection system Air injection system operates Pulse generation
(See waveform 18)
C45-75 (VCAI) - C45-74 (EAIP) L - BR Power source of Air switching valve sensor Engine switch on (IG) 4.5 to 5.5 V
C45-73 (AIP) - C45-74 (EAIP) P - BR Secondary air injection system pressure signal Engine switch on (IG) 3.0 to 3.6 V
C45-72 (AIP2) - C45-74 (EAIP) LG - BR Secondary air injection system pressure signal Engine switch on (IG) 3.0 to 3.6 V

HINT:

*: The ECM terminal voltage is constant regardless of the output voltage from the sensor.


a.
U115314E05
0.563,0.177 1.25,0.375 0.688,0.198 10 false 5 V/DIV. 0.552,1.104 0.99,1.302 0.438,0.198 10 false GND 1.479,1.917 2.375,2.115 0.896,0.198 10 false 1 msec./DIV.

WAVEFORM 1:

Camshaft Oil Control Valve (OCV)
Terminal No. (Symbol) Tool Setting Condition
C45-6 (OC1+) - C45-5 (OC1-) 5 V/DIV., 1 msec./DIV. Idling
C45-4 (OC2+) - C45-3 (OC2-) 5 V/DIV., 1 msec./DIV. Idling
C45-2 (OE1+) - C45-1 (OE1-) 5 V/DIV., 1 msec./DIV. Idling
C45-24 (OE2+) - C45-47 (OE2-) 5 V/DIV., 1 msec./DIV. Idling


b.
A172534E09
0.719,0.198 1.26,0.354 0.542,0.156 10 false 5 V/DIV. 0.802,1.542 1.135,1.729 0.333,0.188 10 false GND 0.792,0.771 1.125,0.958 0.333,0.188 10 false GND 1.792,1.813 2.688,2 0.896,0.188 10 false 10 msec./DIV. 3.094,1.01 3.396,1.167 0.302,0.156 10 false CH2 3.094,0.167 3.396,0.323 0.302,0.156 10 false CH1

WAVEFORM 2:

A/F Sensor Heater Signal
Terminal No. (Symbol) Tool Setting Condition
C45-22 (HA1A) - C45-23 (E04) 5 V/DIV., 10 msec./DIV. Idling with warm engine
C45-45 (HA2A) - C45-46 (E05) 5 V/DIV., 10 msec./DIV. Idling with warm engine

HINT:

The wavelength varies in accordance with the engine operating condition.



c.
U115312E05
0.542,0.177 1.26,0.396 0.719,0.219 10 false 0.2 V/DIV. 0.604,1.479 0.99,1.677 0.385,0.198 10 false GND 1.75,1.885 2.75,2.083 1,0.198 10 false 200 msec./DIV.

WAVEFORM 3:

Heated Oxygen Sensor
Terminal No. (Symbol) Tool Setting Condition
C45-96 (OX1B) - C45-95 (EX1B) 0.2 V/DIV., 200 msec./DIV. Engine speed maintained at 2500 rpm for 2 minutes after warming up sensor
C45-119 (OX2B) - C45-118 (EX2B) 0.2 V/DIV., 200 msec./DIV. Engine speed maintained at 2500 rpm for 2 minutes after warming up sensor

HINT:

In the Data List, item O2S B1S2 or O2S B2S2 shows the ECM input values from the heated oxygen sensor.



d.
A385667E01
0.594,0.177 1.24,0.448 0.646,0.271 10 false 20 V/DIV. 0.646,1.563 1.01,1.813 0.365,0.25 10 false GND 1.844,1.865 2.771,2.115 0.927,0.25 10 false 20 msec./DIV.

WAVEFORM 4:

Injector No. 1 (to No. 8) Injection Signal
Terminal No. (Symbol) Tool Setting Condition
C45-86 (#10) - C45-41 (E01) 20 V/DIV., 20 msec./DIV. Idling
C45-109 (#20) - C45-41 (E01) 20 V/DIV., 20 msec./DIV. Idling
C45-85 (#30) - C45-41 (E01) 20 V/DIV., 20 msec./DIV. Idling
C45-108 (#40) - C45-41 (E01) 20 V/DIV., 20 msec./DIV. Idling
C45-84 (#50) - C45-41 (E01) 20 V/DIV., 20 msec./DIV. Idling
C45-107 (#60) - C45-41 (E01) 20 V/DIV., 20 msec./DIV. Idling
C45-83 (#70) - C45-41 (E01) 20 V/DIV., 20 msec./DIV. Idling
C45-106 (#80) - C45-41 (E01) 20 V/DIV., 20 msec./DIV. Idling

HINT:

The wavelength becomes shorter as the engine speed increases.



e.
A385668E01
2.406,0.26 2.969,0.563 0.563,0.302 10 false 1 V/DIV. 2.646,0.979 3.063,1.167 0.417,0.188 10 false GND 1.094,1.865 2,2.073 0.906,0.208 10 false 1 msec./DIV.

WAVEFORM 5:

Knock Sensor
Terminal No. (Symbol) Tool Setting Condition
C45-94 (KNK1) - C45-93 (EKNK) 1 V/DIV., 1 msec./DIV. Engine speed maintained at 4000 rpm after warming up engine
C45-117 (KNK2) - C45-116 (EKN2) 1 V/DIV., 1 msec./DIV. Engine speed maintained at 4000 rpm after warming up engine
C45-92 (KNK3) - C45-91 (EKN3) 1 V/DIV., 1 msec./DIV. Engine speed maintained at 4000 rpm after warming up engine
C45-115 (KNK4) - C45-114 (EKN4) 1 V/DIV., 1 msec./DIV. Engine speed maintained at 4000 rpm after warming up engine

HINT:
·

The wavelength becomes shorter as the engine speed increases.

·

The waveforms and amplitudes displayed differ slightly depending on the vehicle.




f.
A217926E03
0.24,1.161 0.470,1.326 0.230,0.165 10 (a) 0.24,1.707 0.455,1.859 0.215,0.151 10 (b) 0.24,2.075 0.479,2.280 0.239,0.206 10 (c) 2.819,1.267 3.155,1.416 0.336,0.149 10 GND 2.819,2.197 3.155,2.346 0.336,0.149 10 GND 2.819,1.815 3.155,1.964 0.336,0.149 10 GND 1.112,2.501 2.032,2.642 0.921,0.141 10 20 msec./DIV. 2.701,0.773 3.265,0.929 0.563,0.156 10 5 V/DIV.

WAVEFORM 6:

Crankshaft Position Sensor and VVT Sensor for Intake Side
Terminal No. (Symbol) Tool Setting Condition
(a) C45-66 (NE+) - C45-65 (NE-) 5 V/DIV., 20 msec./DIV. Idle after engine warmed up
(b) C45-67 (VV1+) - C45-88 (VV1-) 5 V/DIV., 20 msec./DIV. Idle after engine warmed up
(c) C45-112 (VV2+) - C45-111 (VV2-) 5 V/DIV., 20 msec./DIV. Idle after engine warmed up

HINT:

The wavelength becomes shorter as engine speed increases.



g.
A385669E01
0.615,0.177 1.229,0.406 0.615,0.229 10 false 2 V/DIV. 0.844,0.635 1.104,0.875 0.26,0.24 10 false (a) 0.5,0.885 1.188,1.198 0.688,0.313 10 false Ground 0.844,1.271 1.104,1.51 0.26,0.24 10 false (b) 0.521,1.458 1.208,1.771 0.688,0.313 10 false Ground 1.771,1.813 3.198,2.146 1.427,0.333 10 false 20 msec./DIV.

WAVEFORM 7:

Igniter IGT Signal (from ECM to Igniter) and Igniter IGF Signal (from Igniter to ECM)
Terminal No. (Symbol) Tool Setting Condition
(a) C45-37 (IGT1) - C45-81 (E1) 2 V/DIV., 20 msec./DIV. Idling
(a) C45-36 (IGT2) - C45-81 (E1) 2 V/DIV., 20 msec./DIV. Idling
(a) C45-35 (IGT3) - C45-81 (E1) 2 V/DIV., 20 msec./DIV. Idling
(a) C45-34 (IGT4) - C45-81 (E1) 2 V/DIV., 20 msec./DIV. Idling
(a) C45-33 (IGT5) - C45-81 (E1) 2 V/DIV., 20 msec./DIV. Idling
(a) C45-32 (IGT6) - C45-81 (E1) 2 V/DIV., 20 msec./DIV. Idling
(a) C45-31 (IGT7) - C45-81 (E1) 2 V/DIV., 20 msec./DIV. Idling
(a) C45-30 (IGT8) - C45-81 (E1) 2 V/DIV., 20 msec./DIV. Idling
(b) C45-54 (IGF1) - C45-81 (E1) 2 V/DIV., 20 msec./DIV. Idling
(b) C45-53 (IGF2) - C45-81 (E1) 2 V/DIV., 20 msec./DIV. Idling

HINT:

The wavelength becomes shorter as engine speed increases.



h.
A149742E22
2.802,1.635 3.135,1.781 0.333,0.146 10 GND 1.25,2.521 2.042,2.667 0.792,0.146 10 20 ms./DIV. 2.615,0.75 3.25,0.906 0.635,0.156 10 10 V/DIV.

WAVEFORM 8:

Purge VSV
Terminal No. (Symbol) Tool Setting Condition
C45-82 (PRG) - C45-81 (E1) 10 V/DIV., 20 msec./DIV. Idling

HINT:

If the waveform is not similar to the illustration, check the waveform again after idling for 10 minutes or more.



i.
U115313E05
0.521,0.219 1.208,0.417 0.688,0.198 10 false 2 V/DIV. 0.542,1.167 0.938,1.365 0.396,0.198 10 false GND 1.708,1.885 2.667,2.083 0.958,0.198 10 false 20 msec./DIV.

WAVEFORM 9:

Vehicle Speed Signal
Terminal No. (Symbol) Tool Setting Condition
A38-44 (SPD) - C45-81 (E1) 2 V/DIV., 20 msec./DIV. Driving at 20 km/h (12 mph)

HINT:

The wavelength becomes shorter as the vehicle speed increases.



j.
A208000E64
2.865,1 3.229,1.219 0.365,0.219 10 false GND 2.646,0.271 3.333,0.51 0.688,0.24 10 false 5 V/DIV. 1.448,1.802 2.375,2.063 0.927,0.26 10 false 1 ms./DIV.

WAVEFORM 10:

Throttle Actuator Positive Terminal
Terminal No. (Symbol) Tool Setting Condition
C45-20 (M+) - C45-18 (ME01) 5 V/DIV., 1 msec./DIV. Idling with warm engine

HINT:

The duty ratio varies depending on the throttle actuator operation.



k.
U147433E03
0.615,0.188 1.188,0.385 0.573,0.198 10 false 5 V/DIV. 0.615,1.323 0.99,1.521 0.375,0.198 10 false GND 1.844,1.833 2.719,2.031 0.875,0.198 10 false 1 msec./DIV.

WAVEFORM 11:

Throttle Actuator Negative Terminal
Terminal No. (Symbol) Tool Setting Condition
C45-19 (M-) - C45-18 (ME01) 5 V/DIV., 1 msec./DIV. Idling with warm engine

HINT:

The duty ratio varies depending on the throttle actuator operation.



l.
A385670E01
0.604,0.76 1.219,0.979 0.615,0.219 10 false 5 V/DIV. 0.646,2.042 1.26,2.26 0.615,0.219 10 false GND 1.781,2.688 2.771,2.927 0.99,0.24 10 false 10 msec./DIV.

WAVEFORM 12:

Engine Speed Signal
Terminal No. (Symbol) Tool Setting Condition
A38-37 (TACH) - C45-81 (E1) 5 V/DIV., 10 msec./DIV. Idling

HINT:

The wavelength becomes shorter as the engine speed increases.



m.
A385671E01
2.76,0.24 3.375,0.458 0.615,0.219 10 false 1 V/DIV. 2.969,1.385 3.427,1.625 0.458,0.24 10 false GND 1.365,1.885 2.281,2.146 0.917,0.26 10 false 10 μsec./DIV.

WAVEFORM 13:

CAN Communication Signal (Reference)
Terminal No. (Symbol) Tool Setting Condition
A38-11 (CANH) - C45-81 (E1)
A38-10 (CANP) - C45-81 (E1)
1 V/DIV., 10 μsec./DIV. Engine stops and engine switch on (IG)

HINT:

The waveform varies depending on the CAN communication signal.



n.
A385291E01
2.969,1.375 3.427,1.573 0.458,0.198 10 false GND 2.75,0.083 3.354,0.354 0.604,0.271 10 false 1 V/DIV. 1.385,1.854 2.458,2.146 1.073,0.292 10 false 10 μsec./DIV.

WAVEFORM 14:

CAN Communication Signal (Reference)
Terminal No. (Symbol) Tool Setting Condition
A38-19 (CANL) - C45-81 (E1)
A38-18 (CANN) - C45-81 (E1)
1 V/DIV., 10 μsec./DIV. Engine stops and engine switch on (IG)

HINT:

The waveform varies depending on the CAN communication signal.



o.
A211721E03
2.827,1.417 3.206,1.598 0.379,0.181 10 GND 2.827,1.965 3.206,2.145 0.379,0.180 10 GND 0.146,1.87 0.458,2.033 0.312,0.163 10 CH2 0.146,1.321 0.456,1.484 0.310,0.163 10 CH1 1.123,2.469 2.063,2.645 0.941,0.177 10 20 msec./DIV. 2.696,0.738 3.261,0.914 0.566,0.177 10 5 V/DIV.

WAVEFORM 15:

Crankshaft Position Sensor and Camshaft Position Sensor
Terminal No. (Symbol) Tool Setting Condition
CH1: C45-66 (NE+) - C45-65 (NE-) 5 V/DIV., 20 msec./DIV. Idle after engine warmed up
CH2: C45-89 (G2+) - C45-88 (VV1-) 5 V/DIV., 20 msec./DIV. Idle after engine warmed up

HINT:

The wavelength becomes shorter as the engine speed increases.



p.
A217927E03
0.263,1.166 0.493,1.331 0.230,0.165 10 (a) 0.263,1.711 0.459,1.894 0.196,0.183 10 (b) 0.263,2.083 0.473,2.252 0.210,0.169 10 (c) 2.827,1.272 3.164,1.421 0.336,0.149 10 GND 2.827,2.197 3.164,2.346 0.336,0.149 10 GND 2.827,1.824 3.164,1.973 0.336,0.149 10 GND 1.097,2.511 2.017,2.652 0.921,0.141 10 20 msec./DIV. 2.708,0.79 3.271,0.946 0.563,0.156 10 5 V/DIV.

WAVEFORM 16:

Crankshaft Position Sensor and VVT Sensor for Exhaust Side
Terminal No. (Symbol) Tool Setting Condition
(a) C45-66 (NE+) - C45-65 (NE-) 5 V/DIV., 20 msec./DIV. Idle after engine warmed up
(b) C45-90 (EV1+) - C45-88 (VV1-) 5 V/DIV., 20 msec./DIV. Idle after engine warmed up
(c) C45-113 (EV2+) - C45-111 (VV2-) 5 V/DIV., 20 msec./DIV. Idle after engine warmed up

HINT:

The wavelength becomes shorter as engine speed increases.



q.
A304647E10
2.802,1.635 3.385,1.854 0.583,0.219 10 false GND 2.542,0.135 3.146,0.323 0.604,0.188 10 false 1 V/DIV. 1.021,2 1.948,2.177 0.927,0.177 10 false 2 msec./DIV.

WAVEFORM 17:

Engine speed signal
Terminal No. (Symbol) Tool Setting Condition
(a) A38-41 (NEO) - C45-81 (E1) 1 V/DIV., 2 msec./DIV. Idle after engine warmed up


r.
A255990E01
2.962,0.998 3.299,1.147 0.337,0.149 10 GND 2.786,0.225 3.328,0.374 0.542,0.149 10 5 V/DIV. 1.2,1.789 2.096,1.938 0.896,0.149 10 50 msec./DIV.

WAVEFORM 18:

Terminal DI of Air Injection Control Driver
Terminal No. (Symbol) Tool Setting Condition
(a) C45-52 (AIDI) - C45-81 (E1)
(b) C45-51 (AID2) - C45-81 (E1)
5 V/DIV., 50 msec./DIV. Performing system check using Techstream (Secondary Air Injection Check)

HINT:

The wavelength changes when the air injection control driver detects malfunctions in the air injection system.