Home › Engine / Hybrid System › 3UR-FE (ENGINE CONTROL) › SFI SYSTEM(w/ Secondary Air Injection System) › from 2017.08
RM2660E _51 Engine / Hybrid System _052775 3UR-FE ENGINE CONTROL _0327320 SFI SYSTEM(w/ Secondary Air Injection System) C

3UR-FE ENGINE CONTROL  SFI SYSTEM(w/ Secondary Air Injection System)  P0630  VIN not Programmed or Mismatch - ECM / PCM  


DESCRIPTION

DTC P0630 is stored when the Vehicle Identification Number (VIN) or frame number is not stored in the ECM or the input VIN or frame number is not accurate.

DTC No. DTC Detection Condition Trouble Area
P0630 Either of the following conditions is met (1 trip detection logic):
·

The VIN or frame number is not stored in the ECM.

·

The VIN or frame number written to the ECM is not accurate.


ECM

PROCEDURE

1.CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0630)
a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG) and turn the GTS on.


c.

Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.


d.

Read DTCs.

Result:
Result Proceed to
P0630 is output A
P0630 and other DTCs are output B


If any DTCs other than P0630 are output, troubleshoot those DTCs first.

HINT:

If P0630 is output, the VIN or frame number must be written to the ECM using the GTS. However, all DTCs are cleared automatically by the GTS when the VIN or frame number is written. If DTCs other than P0630 are output, troubleshoot them first.




A

2.INPUT VIN OR FRAME NUMBER

B

2.INPUT VIN OR FRAME NUMBER

NEXT

END