Home › Drivetrain › JF2A (TRANSFER / 4WD / AWD) › CENTER DIFFERENTIAL LOCK SWITCH(w/ Entry and Start System) › from 2017.08
RM2660E _52 Drivetrain _052810 JF2A TRANSFER / 4WD / AWD _0255337 CENTER DIFFERENTIAL LOCK SWITCH(w/ Entry and Start System) G

JF2A TRANSFER / 4WD / AWD  CENTER DIFFERENTIAL LOCK SWITCH(w/ Entry and Start System)  INSPECTION  


PROCEDURE

Hide 84010D 1.INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (for Automatic Transmission)

a.
C331266C11
1.229,1.083 0.865,0.573 0.865,0.573 0.646,0.573 true 1.51,1.427 1.927,1.938 1.927,1.938 2.115,1.938 true 0.063,0 0.26,0.198 0.198,0.198 10 false *a 0.49,0.5 0.635,0.688 0.146,0.188 10 false E 2.156,1.854 2.594,2.042 0.438,0.188 10 false CPU
*a Component without harness connected
(Integration Control and Panel Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
5 (E) - 9 (CPU) Mode switch being pushed
(Center Differential Lock Switch)
Below 1 Ω
Mode switch not pushed
(Center Differential Lock Switch)
10 kΩ or higher


If the result is not as specified, replace the integration control and panel assembly.


Hide 84725 2.INSPECT CENTER DIFFERENTIAL LOCK SWITCH (for Manual Transmission)

a.
C381468C01
2.323,1.448 2.323,2.031 2.323,2.031 2.49,2.031 true 1.271,2.031 1.438,2.031 1.438,2.031 1.438,1.448 true 0.948,1.938 1.406,2.135 0.458,0.198 10 false CPU 2.542,1.938 3,2.135 0.458,0.198 10 false E 0.104,0.083 0.417,0.333 0.313,0.25 10 false *a
*a Component without harness connected
(Center Differential Lock Switch)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (E) - 4 (CPU) Center differential lock switch being pushed Below 1 Ω
Center differential lock switch not pushed 10 kΩ or higher


If the result is not as specified, replace the center differential lock switch.