Home › Drivetrain › JF2A (TRANSFER / 4WD / AWD) › CENTER DIFFERENTIAL LOCK SWITCH(w/o Entry and Start System) › from 2017.08
RM2660E _52 Drivetrain _052810 JF2A TRANSFER / 4WD / AWD _0255338 CENTER DIFFERENTIAL LOCK SWITCH(w/o Entry and Start System) G

JF2A TRANSFER / 4WD / AWD  CENTER DIFFERENTIAL LOCK SWITCH(w/o Entry and Start System)  INSPECTION  


PROCEDURE

Hide 84725 1.INSPECT CENTER DIFFERENTIAL LOCK SWITCH

a.
C381468C02
2.323,1.458 2.323,2.042 2.323,2.042 2.49,2.042 true 1.271,2.042 1.438,2.042 1.438,2.042 1.438,1.458 true 0.948,1.948 1.406,2.146 0.458,0.198 10 false CPU 2.552,1.948 3.01,2.146 0.458,0.198 10 false E 0.083,0.083 0.417,0.333 0.333,0.25 10 false *a
*a Component without harness connected
(Center Differential Lock Switch)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (E) - 4 (CPU) Center differential lock switch being pushed Below 1 Ω
Center differential lock switch not pushed 10 kΩ or higher


If the result is not as specified, replace the center differential lock switch.