84840G
1.INSPECT BACK DOOR OPENER SWITCH ASSEMBLY
| *a | Open Switch |
| *b | Lock Switch |
| *c | Pushed |
| *d | Not pushed |
| *e | Component without harness connected
(Back Door Opener Switch) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 2 (E) - 1 (L) | Lock switch pushed | Below 1 Ω |
| 2 (E) - 1 (L)
3 (UL) - 2 (E) |
Lock switch and open switch not pushed | 10 kΩ or higher |
| 3 (UL) - 2 (E) | Open switch pushed | Below 1 Ω |
If the result is not as specified, replace the back door opener switch assembly.