Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › from 2017.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255487 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) U

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  TERMINALS OF ECU  


CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY


U166588E02
1.115,0.823 1.531,1.135 0.417,0.313 10 false F118 0.906,2.688 1.375,3.021 0.469,0.333 10 false F120 5.792,1.906 6.052,2.146 0.26,0.24 10 false A 6.313,1.313 6.667,1.563 0.354,0.25 10 false RA 1.833,2.698 2.271,3 0.438,0.302 10 false F122 4.865,0.833 5.292,1.115 0.427,0.281 10 false F124

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F122-1 (RR+) - F120-7 (GND1) LA-R - W-B Voice signal Voice guidance sounding A waveform synchronized with voice signals is output
F122-2 (RL+) - F120-7 (GND1) LA-B - W-B Voice signal Voice guidance sounding A waveform synchronized with voice signals is output
F122-3 (RR-) - F120-7 (GND1) LA-W - W-B Voice signal Voice guidance sounding A waveform synchronized with voice signals is output
F122-5 (ILL-) - F120-7 (GND1) W - W-B Illumination signal ground Always Below 1 Ω
F122-6 (RL-) - F120-7 (GND1) LA-L - W-B Voice signal Voice guidance sounding A waveform synchronized with voice signals is output
F120-1 (FR+) - F120-7 (GND1) LA-W - W-B Sound signal (Right) Audio system playing A waveform synchronized with sound signals is output
F120-2 (FL+) - F120-7 (GND1) LA-B - W-B Sound signal (Left) Audio system playing A waveform synchronized with sound signals is output
F120-3 (ACC1) - F120-7 (GND1) BE - W-B Power source (ACC) Engine switch on (ACC) 11 to 14 V
Engine switch off Below 1 V
F120-4 (+B1) - F120-7 (GND1) V - W-B Power source Always 11 to 14 V
F120-5 (FR-) - F120-7 (GND1) LA-B - W-B Sound signal (Right) Audio system playing A waveform synchronized with sound signals is output
F120-6 (FL-) - F120-7 (GND1) LA-W - W-B Sound signal (Left) Audio system playing A waveform synchronized with sound signals is output
F120-7 (GND1) - Body ground W-B - Body ground Ground Always Below 1 Ω
F120-10 (ILL+) - F120-7 (GND1) G - W-B Illumination signal Engine switch on (IG), light control switch off → tail or head position Below 1 V → 11 to 14 V
F118-3 (CNH1) W Local bus communication signal - -
F118-4 (CNL1) G Local bus communication signal - -
F124-1 (IG) - F120-7 (GND1) B - W-B Power source (IG) Engine switch on (IG) 11 to 14 V
Engine switch off Below 1 V
F124-2 (REV) - F120-7 (GND1) L - W-B Reverse signal See "Vehicle Signal Check Mode" in Operation Check (See page (Click here)) -
F124-4 (MACC) - F120-7 (GND1) R - W-B Telephone microphone assembly power supply Engine switch off Below 1 V
Engine switch on (ACC) 4 to 6 V
F124-5 (MIN+) - F120-7 (GND1) W - W-B Microphone voice signal See "Microphone & Voice Recognition Check" in Operation Check (See page (Click here)) -
F124-6 (SNS2) - F120-7 (GND1) L - W-B Telephone microphone assembly detection signal Always Below 1 Ω
F124-9 (CANH) G CAN communication signal - -
F124-10 (CANL) GR CAN communication signal - -
F124-11 (AGND) - Body ground Shielded - Body ground Shield ground Always Below 1 Ω
F124-12 (SG) - Body ground Shielded - Body ground Shield ground Always Below 1 Ω
F124-13 (VV+) - F120-7 (GND1) R - W-B Video signal External device playing (When stereo jack used) A waveform synchronized with voice signals is output
F124-14 (VV-) - F120-7 (GND1) L - W-B Video signal External device playing (When stereo jack used) A waveform synchronized with voice signals is output
F124-15 (PKB) - F120-7 (GND1) GR - W-B Parking brake switch signal See "Vehicle Signal Check Mode" in Operation Check (See page (Click here)) -
F124-17 (SPD) - F120-7 (GND1) L - W-B Speed signal from combination meter assembly See "Vehicle Signal Check Mode" in Operation Check (See page (Click here)) -
F124-18 (SGND) - Body ground Shielded - Body ground Shield ground Always Below 1 Ω
F124-19 (MIN-) - Body ground B - Body ground Microphone voice signal See "Microphone & Voice Recognition Check" in Operation Check (See page (Click here)) -
F124-21 (SW1) - F124-23 (SWG) L - BR Steering pad switch signal Steering pad switch not operated 4.44 to 5.43 V
Seek+ switch pushed 0.45 to 0.65 V
Seek- switch pushed 1.19 to 1.49 V
Vol+ switch pushed 2.09 to 2.54 V
Vol- switch pushed 3.2 to 3.88 V
F124-22 (SW2) - F124-23 (SWG) P - BR Steering pad switch signal Steering pad switch not operated 4.44 to 5.43 V
MODE switch pushed 0.45 to 0.65 V
On hook switch pushed 1.19 to 1.49 V
Off hook switch pushed 2.09 to 2.54 V
Voice switch pushed 3.2 to 3.88 V
F124-23 (SWG) - Body ground BR - Body ground Steering pad switch signal ground Always Below 1 Ω
F124-25 (ADPG) - F120-7 (GND1) P - W-B External device connector detection signal External device connected Below 1 V
External device not connected 2.1 to 3 V
F124-26 (VAR+) - H12-27 (VA-) W - R Sound signal (Right) AUX audio device playing (When stereo jack adapter used) A waveform synchronized with voice signals is output
F124-27 (VA-) - F120-7 (GND1) R - W-B Sound signal ground Always Below 1 Ω
F124-28 (VAL+) - H124-27 (VA-) B - R Sound signal (Left) AUX audio device playing (When stereo jack adapter used) A waveform synchronized with voice signals is output
A-1 (USV1) # Power source - -
A-2 (US1-) # Data signal - -
A-3 (US1+) # Data signal - -
A-4 (UGD1) # Ground - -
A-5 (USG1) Shielded Shield ground - -

#: There is no wire color information