86160T
1.INSTALL REAR HEADER SPEAKER ASSEMBLY
Connect the connector.
Install the rear header speaker assembly with the 3 screws.
64780A
2.INSTALL BACK DOOR TRIM PANEL ASSEMBLY
67937B
3.INSTALL BACK DOOR SIDE GARNISH RH
67938A
4.INSTALL BACK DOOR SIDE GARNISH LH
67939B
5.INSTALL CENTER BACK DOOR GARNISH
6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).