Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY (for Standard) › from 2018.08
RM2660E _59 Vehicle Exterior _052855 LIGHTING (EXT) _0255795 LICENSE PLATE LIGHT ASSEMBLY(for Standard) A

LIGHTING (EXT)  LICENSE PLATE LIGHT ASSEMBLY(for Standard)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81690A 1.INSTALL LICENSE PLATE LIGHT ASSEMBLY LH

a.
E402310

Connect the connector.


b.

Set the license plate light assembly LH in place.

HINT:
·

Install with the left side mark on the left side, and right side mark on the right side.

·

Set the claw with the narrow end facing towards the outside of the vehicle and the wide end facing the inside.


E401497C01
4.052,2.219 4.573,1.469 true 2.542,1.479 3.146,2.26 true 0.469,0.26 0.823,0.604 0.354,0.344 12 false *A 3.115,2.271 3.427,2.427 0.313,0.156 10 false *a 3.948,2.219 4.26,2.375 0.313,0.156 10 false *b 1.406,3 1.719,3.156 0.313,0.156 10 false *c 2.563,2.698 2.875,2.854 0.313,0.156 10 false *d 5.719,2.688 6.031,2.844 0.313,0.156 10 false *c 4.552,3.042 4.865,3.198 0.313,0.156 10 false *d 3.667,0.26 4.021,0.604 0.354,0.344 12 false *B
*A for LH Side *B for RH Side
*a Left Side Mark *b Right Side Mark
*c Wide end of claw *d Narrow end of claw




c.
E401496

Attach the 2 claws to install the license plate light assembly LH.


Hide 67935B 2.INSTALL BACK DOOR GARNISH

Hide 67938A 3.INSTALL BACK DOOR SIDE GARNISH LH

Hide 67937B 4.INSTALL BACK DOOR SIDE GARNISH RH

Hide 67939B 5.INSTALL CENTER BACK DOOR GARNISH