81690A
1.INSPECT LICENSE PLATE LIGHT ASSEMBLY LH
| *a | Component without harness connected
(License Plate Light Assembly LH) |
Apply 6.0 V (4 dry cell batteries in series) to the connector and check the illumination conditions.
| Dry Cell Battery Connection | Specified Condition |
|---|---|
|
If the result is not as specified, replace the license plate light assembly LH. |
|
| Positive (+) → 1 (B)
Negative (-) → 2 (E) |
License plate light assembly LH illuminates |
Do not apply more than 6.0 V.
81270D
2.INSPECT LICENSE PLATE LIGHT ASSEMBLY RH
| *a | Component without harness connected
(License Plate Light Assembly RH) |
Apply 6.0 V (4 dry cell batteries in series) to the connector and check the illumination conditions.
| Dry Cell Battery Connection | Specified Condition |
|---|---|
|
If the result is not as specified, replace the license plate light assembly RH. |
|
| Positive (+) → 1 (B)
Negative (-) → 2 (E) |
License plate light assembly RH illuminates |
Do not apply more than 6.0 V.