Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE (w/o Tire Carrier) › from 2019.08
RM2660E _59 Vehicle Exterior _052857 EXTERIOR PANELS / TRIM _0255834 NAME PLATE(w/o Tire Carrier) A

EXTERIOR PANELS / TRIM  NAME PLATE(w/o Tire Carrier)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

When installing the symbol emblem, rear No. 3 body name plate, No. 5 back door name plate, back body name plate and No. 6 luggage compartment door name plate heat the vehicle body, symbol emblem, rear No. 3 body name plate, No. 5 back door name plate, back body name plate and No. 6 luggage compartment door name plate name plate using a heat light.


Standard Heating Temperature:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Symbol Emblem 20 to 30°C (68 to 86°F)
Rear No. 3 Body Name Plate 20 to 30°C (68 to 86°F)
No. 5 Back Door Name Plate 20 to 30°C (68 to 86°F)
Back Body Name Plate 20 to 30°C (68 to 86°F)
No. 6 luggage compartment door name plate 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the vehicle body, symbol emblem, rear No. 3 body name plate, No. 5 back door name plate, back body name plate and No. 6 luggage compartment door name plate excessively.


PROCEDURE

Hide 75741E 1.INSTALL SYMBOL EMBLEM

a.
B430014C01
2.781,3.781 2.938,3.781 false 0.906,3.521 1.073,3.521 false 0.719,3.438 0.875,3.615 0.156,0.177 10 false *a 2.979,3.677 3.135,3.854 0.156,0.177 10 false *a
*a Boss


Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new symbol emblem.

i.

Using a heat light, heat the vehicle body and a new symbol emblem.


ii.

Remove the peeling paper from the face of the symbol emblem.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Align the boss positions and install the symbol emblem.

HINT:

Press the symbol emblem firmly to install it.




Hide 75473B 2.INSTALL REAR NO. 3 BODY NAME PLATE

a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new rear No. 3 body name plate.

i.

Using a heat light, heat the vehicle body and a new rear No. 3 body name plate.


ii.

Remove the peeling paper from the face of the rear No. 3 body name plate.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

for Type A:

Install the rear No. 3 body name plate in the position shown in the illustration.

HINT:

Press the rear No. 3 body name plate firmly to install it.


B430015C01
0.083,0.073 0.417,0.375 0.333,0.302 12 false *A 3.917,1.708 4.073,1.885 0.156,0.177 10 false A 3.927,4.656 4.083,4.833 0.156,0.177 10 false A 4.375,4.167 4.531,4.344 0.156,0.177 10 false B 4.375,1.26 4.531,1.438 0.156,0.177 10 false B
*A for Type A - -


Standard:
Area Specified Condition Area Specified Condition
A 267.5 mm (10.2 in.) B 31.5 mm (1.24 in.)



iv.

for Type B:

Install the rear No. 3 body name plate in the position shown in the illustration.

HINT:

Press the rear No. 3 body name plate firmly to install it.


B430016C01
4.396,1.323 4.552,1.5 0.156,0.177 10 false B 4.396,4.188 4.552,4.365 0.156,0.177 10 false B 3.948,4.615 4.104,4.792 0.156,0.177 10 false A 3.958,1.75 4.115,1.927 0.156,0.177 10 false A 0.094,0.083 0.396,0.448 0.302,0.365 12 false *A
*A for Type B - -


Standard:
Area Specified Condition Area Specified Condition
A 266 mm (10.5 in.) B 32 mm (1.26 in.)



v.

for Type C:

Install the rear No. 3 body name plate in the position shown in the illustration.

HINT:

Press the rear No. 3 body name plate firmly to install it.


B430017C01
3.063,3.479 3.219,3.656 0.156,0.177 10 false B 2.271,3.177 2.427,3.354 0.156,0.177 10 false A 6.313,3.448 6.469,3.625 0.156,0.177 10 false B 5.531,3.135 5.688,3.313 0.156,0.177 10 false C 6.302,6.302 6.458,6.479 0.156,0.177 10 false D 5.531,5.948 5.688,6.125 0.156,0.177 10 false C 0.083,0.073 0.406,0.458 0.323,0.385 12 false *A
*A for Type C - -


Standard:
Area Specified Condition Area Specified Condition
A 160.5 mm (6.32 in.) B 271 mm (10.7 in.)
C 148 mm (5.83 in.) D 269 mm (10.6 in.)



vi.

for Type D:

Install the rear No. 3 body name plate in the position shown in the illustration.

HINT:

Press the rear No. 3 body name plate firmly to install it.


B552809C01
4.552,4.5 4.708,4.698 0.156,0.198 10 false A 4.552,1.875 4.708,2.073 0.156,0.198 10 false A 5.823,1.542 5.979,1.74 0.156,0.198 10 false C 4.604,1.531 4.76,1.729 0.156,0.198 10 false B 4.604,4.156 4.76,4.354 0.156,0.198 10 false B 5.031,4.677 5.188,4.875 0.156,0.198 10 false F 0.094,0.083 0.563,0.583 0.469,0.5 12 false *A 6.229,4.167 6.385,4.365 0.156,0.198 10 false E 4.948,2.083 5.104,2.281 0.156,0.198 10 false D
*A for Type D - -


Standard:
Area Specified Condition Area Specified Condition
A 100.0 mm (3.94 in.) B 64.0 mm (2.52 in.)
C 63.2 mm (2.49 in.) D 197.5 mm (7.78 in.)
E 65.3 mm (2.57 in.) F 257.0 mm (10.1 in.)




Hide 75445A 3.INSTALL NO. 5 BACK DOOR NAME PLATE

a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new No. 5 back door name plate.

i.

Using a heat light, heat the vehicle body and a new No. 5 back door name plate.


ii.

Remove the peeling paper from the face of the No. 5 back door name plate.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

for Type A:

Install the No. 5 back door name plate in the position shown in the illustration.

HINT:

Press the No. 5 back door name plate firmly to install it.


B430018C01
2.542,4.698 2.698,4.875 0.156,0.177 10 false A 6.198,4.688 6.354,4.865 0.156,0.177 10 false A 3.052,5.302 3.208,5.479 0.156,0.177 10 false B 5.24,5.365 5.396,5.542 0.156,0.177 10 false C 6.698,5.323 6.854,5.5 0.156,0.177 10 false B 0.104,0.073 0.354,0.417 0.25,0.344 12 false *A
*A for Type A - -


Standard:
Area Specified Condition Area Specified Condition
A 32.5 mm (1.28 in.) B 266 mm (10.4 in.)
C 240.8 mm (9.48 in.) - -



iv.

for Type B:

Install the No. 5 back door name plate in the position shown in the illustration.

HINT:

Press the No. 5 back door name plate firmly to install it.


B430019C02
6,1.583 6.156,1.76 0.156,0.177 10 false A 6.469,2.177 6.625,2.354 0.156,0.177 10 false B 0.083,0.063 0.406,0.365 0.323,0.302 12 false *A
*A for Type B - -


Standard:
Area Specified Condition Area Specified Condition
A 32.5 mm (1.28 in.) B 266 mm (10.4 in.)



v.

for Type C:

Install the No. 5 back door name plate in the position shown in the illustration.

HINT:

Press the No. 5 back door name plate firmly to install it.


B430020C01
6.167,4.531 6.323,4.708 0.156,0.177 10 false B 6.188,1.719 6.344,1.896 0.156,0.177 10 false B 5.76,4.125 5.917,4.302 0.156,0.177 10 false A 5.771,1.292 5.927,1.469 0.156,0.177 10 false A 0.094,0.073 0.406,0.375 0.313,0.302 12 false *A
*A for Type C - -


Standard:
Area Specified Condition Area Specified Condition
A 32.5 mm (1.28 in.) B 266 mm (10.4 in.)




Hide 4.INSTALL BACK DOOR NAME PLATE

a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new back door name plate.

i.

Using a heat light, heat the vehicle body and a new back door name plate.


ii.

Remove the peeling paper from the face of the back door name plate.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the back door name plate in the position shown in the illustration.

HINT:

Press the back door name plate firmly to install it.


B430021C01
4.375,1.542 4.531,1.719 0.156,0.177 10 false A 3.854,2.198 4.01,2.375 0.156,0.177 10 false B 0.083,0.052 0.708,0.573 0.625,0.521 12 false *A
*A for Type C - -


Standard:
Area Specified Condition Area Specified Condition
A 33 mm (1.30 in.) B 274 mm (10.8 in.)




Hide 5.INSTALL NO. 6 LUGGAGE COMPARTMENT DOOR NAME PLATE

a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new No. 6 luggage compartment door name plate.

i.

Using a heat light, heat the vehicle body and a new No. 6 luggage compartment door name plate.


ii.

Remove the peeling paper from the face of the No. 6 luggage compartment door name plate.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 6 luggage compartment door name plate in the position shown in the illustration.

HINT:

Press the No. 6 luggage compartment door name plate firmly to install it.


B430022C01
4.823,1.583 4.979,1.76 0.156,0.177 10 false A 3.677,2.271 3.833,2.448 0.156,0.177 10 false B 0.073,0.063 0.51,0.385 0.438,0.323 12 false *A
*A for Type C - -


Standard:
Area Specified Condition Area Specified Condition
A 188.5 mm (7.42 in.) B 274 mm (10.8 in.)