87834
1.REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)
w/ EC Mirror:
Detach the 2 claws and slide the inner rear view mirror stay holder cover in the direction indicated by the arrow shown in the illustration.
Detach the 2 claws and remove the inner rear view mirror stay holder cover.
w/ Automatic High Beam System:
Detach the 2 claws and slide the inner rear view mirror stay holder cover in the direction indicated by the arrow shown in the illustration.
Detach the 2 claws and remove the inner rear view mirror stay holder cover.
86466E
2.REMOVE NO. 2 FORWARD RECOGNITION COVER (w/ Pre-crash Safety System)
86466D
3.REMOVE NO. 1 FORWARD RECOGNITION COVER (w/ Pre-crash Safety System)
87810
4.REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)
w/ EC Mirror:
Disconnect the connector.
Using a T20 "TORX" socket wrench, remove the screw and inner rear view mirror assembly.
w/ Automatic High Beam System:
Disconnect the connector.
Using a T20 "TORX" socket wrench, remove the screw and inner rear view mirror assembly.
w/ Pre-crash Safety System:
Disconnect the connector.
Detach the clamp.
Using a T20 "TORX" socket wrench, remove the screw and inner rear view mirror assembly.
87810
5.REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)
Using a T20 "TORX" socket wrench, remove the screw and inner rear view mirror assembly.