Home › Drivetrain › AJA0F (AUTOMATIC TRANSMISSION / TRANSAXLE) › PARK / NEUTRAL POSITION SWITCH
RM38G0E _52 Drivetrain _100435 AJA0F AUTOMATIC TRANSMISSION / TRANSAXLE _0467302 PARK / NEUTRAL POSITION SWITCH N

AJA0F AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  ADJUSTMENT  


PROCEDURE

Hide 33825 1.REMOVE TRANSMISSION CONTROL CABLE INSULATOR

Hide 84540 2.ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.

While pushing the shift lock release button, move the shift lever to N.


b.

Remove the bolt of the park/neutral position switch assembly.


c.

Clean the bolt and bolt hole.


d.

Apply adhesive to 2 or 3 threads on the end of the bolt.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent



e.
C459160C01
0.365,1.302 1.146,1.302 true 0.552,1.927 0.917,1.927 0.917,1.927 1.49,1.448 true 0.219,1.188 0.49,1.365 0.271,0.177 10 false *a 0.396,1.823 0.667,2 0.271,0.177 10 false *b
*a Neutral Basic Line
*b Guide Pointer


Align the guide pointer provided for the washer with the neutral basic line.


f.

Hold the park/neutral position switch assembly in position and install the bolt.

Torque:
12.8 N*m (131 kgf*cm, 9 ft.*lbf)


g.

After the adjustment, perform the park/neutral position switch assembly operation check.

Click hereDrivetrain>AJA0F (AUTOMATIC TRANSMISSION / TRANSAXLE)>PARK / NEUTRAL POSITION SWITCH>ON-VEHICLE INSPECTION


Hide 33825 3.INSTALL TRANSMISSION CONTROL CABLE INSULATOR