Home › Engine / Hybrid System › V35A-FTS (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE (for Bank 2)
RM38G0E _51 Engine / Hybrid System _100526 V35A-FTS ENGINE CONTROL _0467361 CAMSHAFT OIL CONTROL VALVE(for Bank 2) G

V35A-FTS ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE(for Bank 2)  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 15370C 1.REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY LH (for Intake Side of Bank 2)

Hide 135A0 2.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (INTAKE CAMSHAFT TIMING GEAR BOLT ASSEMBLY)

a.
A474674C01
1.865,0.979 2.385,0.979 true 2.427,0.917 2.625,1.104 0.198,0.188 10 true *a
*a Plunger


Check the stroke of the plunger in the center of the camshaft timing oil control valve assembly (intake camshaft timing gear bolt assembly).

Standard Stroke:

2.2 mm (0.0867 in.) or more


If the result is not as specified, replace the camshaft timing oil control valve assembly (intake camshaft timing gear bolt assembly).


Hide 15370C 3.INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY LH (for Intake Side of Bank 2)

Hide 15370C 4.REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY LH (for Exhaust Side of Bank 2)

Hide 135A0A 5.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (EXHAUST CAMSHAFT TIMING GEAR BOLT ASSEMBLY)

a.
A474675C01
1.854,0.99 2.375,0.99 true 2.365,0.906 2.563,1.094 0.198,0.188 10 true *a
*a Plunger


Check the stroke of the plunger in the center of the camshaft timing oil control valve assembly (exhaust camshaft timing gear bolt assembly).

Standard Stroke:

2.2 mm (0.0867 in.) or more


If the result is not as specified, replace the camshaft timing oil control valve assembly (exhaust camshaft timing gear bolt assembly).


Hide 15370C 6.INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY LH (for Exhaust Side of Bank 2)