| ● | Non-reusable part | ★ | Precoated part |
This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
17309D 1.REMOVE AIR TUBE SUB-ASSEMBLY LH
2.REMOVE BRACKET
15370C 3.REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY LH (for Intake Side of Bank 2)
Disconnect the cam timing oil control solenoid assembly LH (for Intake Side of Bank 2) connector.
Remove the 2 bolts and cam timing oil control solenoid assembly LH (for Intake Side of Bank 2) from the timing chain or belt cover sub-assembly.
If the cam timing oil control solenoid assembly LH (for Intake Side of Bank 2) has been struck or dropped, replace it.
15370E 4.REMOVE CAM TIMING OIL CONTROL SOLENOID O-RING LH (for Intake Side of Bank 2)
Remove the cam timing oil control solenoid O-ring LH (for Intake Side of Bank 2) from the cam timing oil control solenoid assembly LH (for Intake Side of Bank 2).
When removing the cam timing oil control solenoid O-ring LH (for Intake Side of Bank 2), be careful not to damage the O-ring groove of the cam timing oil control solenoid assembly LH (for Intake Side of Bank 2).
If the O-ring groove of the cam timing oil control solenoid assembly LH (for Intake Side of Bank 2) is damaged, replace the cam timing oil control solenoid assembly LH (for Intake Side of Bank 2) with a new one.
15370C 5.REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY LH (for Exhaust Side of Bank 2)
Disconnect the cam timing oil control solenoid assembly LH (for Exhaust Side of Bank 2) connector.
Remove the 2 bolts and cam timing oil control solenoid assembly LH (for Exhaust Side of Bank 2) from the timing chain or belt cover sub-assembly.
If the cam timing oil control solenoid assembly LH (for Exhaust Side of Bank 2) has been struck or dropped, replace it.
15370E 6.REMOVE CAM TIMING OIL CONTROL SOLENOID O-RING LH (for Exhaust Side of Bank 2)
Remove the cam timing oil control solenoid O-ring LH (for Exhaust Side of Bank 2) from the cam timing oil control solenoid assembly LH (for Exhaust Side of Bank 2).
When removing the cam timing oil control solenoid O-ring LH (for Exhaust Side of Bank 2), be careful not to damage the O-ring groove of the cam timing oil control solenoid assembly LH (for Exhaust Side of Bank 2).
If the O-ring groove of the cam timing oil control solenoid assembly LH (for Exhaust Side of Bank 2) is damaged, replace the cam timing oil control solenoid assembly LH (for Exhaust Side of Bank 2) with a new one.