| ● | Non-reusable part | ★ | Precoated part |
This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
17304A 1.REMOVE AIR TUBE SUB-ASSEMBLY RH
2.REMOVE BRACKET
15370B 3.REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY RH (for Intake Side of Bank 1)
Disconnect the cam timing oil control solenoid assembly RH (for Intake Side of Bank 1) connector.
Remove the 2 bolts and cam timing oil control solenoid assembly RH (for Intake Side of Bank 1) from the timing chain or belt cover sub-assembly.
If the cam timing oil control solenoid assembly RH (for Intake Side of Bank 1) has been struck or dropped, replace it.
15370D 4.REMOVE CAM TIMING OIL CONTROL SOLENOID O-RING RH (for Intake Side of Bank 1)
Remove the O-ring from the cam timing oil control solenoid assembly RH (for Intake Side of Bank 1).
When removing the cam timing oil control solenoid O-ring RH(for Intake Side of Bank 1), be careful not to damage the O-ring groove of the cam timing oil control solenoid assembly RH (for Intake Side of Bank 1).
If the O-ring groove of the cam timing oil control solenoid assembly RH (for Intake Side of Bank 1) is damaged, replace the cam timing oil control solenoid assembly RH (for Intake Side of Bank 1) with a new one.
15370B 5.REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY RH (for Exhaust Side of Bank 1)
Disconnect the cam timing oil control solenoid assembly RH (for Exhaust Side of Bank 1) connector.
Remove the 2 bolts and cam timing oil control solenoid assembly RH (for Exhaust Side of Bank 1) from the timing chain or belt cover sub-assembly.
If the cam timing oil control solenoid assembly RH (for Exhaust Side of Bank 1) has been struck or dropped, replace it.
15370D 6.REMOVE CAM TIMING OIL CONTROL SOLENOID O-RING RH (for Exhaust Side of Bank 1)
Remove the O-ring from the cam timing oil control solenoid assembly RH (for Exhaust Side of Bank 1).
When removing the cam timing oil control solenoid O-ring RH (for Exhaust Side of Bank 1), be careful not to damage the O-ring groove of the cam timing oil control solenoid assembly RH (for Exhaust Side of Bank 1).
If the O-ring groove of the cam timing oil control solenoid assemblyRH (for Exhaust Side of Bank 1) is damaged, replace the cam timing oil control solenoid assembly RH (for Exhaust Side of Bank 1) with a new one.