The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the air fuel ratio sensor removal/installation are shown below.
17140 1.REMOVE EXHAUST MANIFOLD ASSEMBLY RH
17150 2.REMOVE EXHAUST MANIFOLD ASSEMBLY LH
89467B 3.REMOVE AIR FUEL RATIO SENSOR (for Bank 1)
Using SST, remove the air fuel ratio sensor from the exhaust manifold.
Do not damage the air fuel ratio sensor.
89467B 4.REMOVE AIR FUEL RATIO SENSOR (for Bank 2)
Using SST, remove the air fuel ratio sensor from the exhaust manifold.
Do not damage the air fuel ratio sensor.