| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | DRAIN POWER STEERING FLUID | - | - | ( ) |
- |
| 2 | POWER STEERING OIL PRESSURE SENSOR | 89448A | ( ) |
- | - |
| ● | Non-reusable part | - | - |
1.DRAIN POWER STEERING FLUID
89448A 2.REMOVE POWER STEERING OIL PRESSURE SENSOR
Disconnect the power steering oil pressure switch connector.
Using a 24 mm deep socket wrench, remove the power steering oil pressure sensor.
Remove the O-ring from the power steering oil pressure switch.