Home › Power Source / Network › POWER DISTRIBUTION › POWER INTEGRATION SYSTEM
RM38G0E _57 Power Source / Network _100627 POWER DISTRIBUTION _0467511 POWER INTEGRATION SYSTEM C

POWER DISTRIBUTION  POWER INTEGRATION SYSTEM  B235204  Power Integration No.1 System Internal Failure  


DESCRIPTION

This DTC is output when the semiconductor power integration ECU detects a Internal circuit error.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
B235204 Power Integration No.1 System Internal Failure
·

Microcomputer abnormality

·

AD circuit trouble


Semiconductor power integration ECU Power Integration No.1 A

CAUTION / NOTICE / HINT

NOTICE:
·

When using the GTS with the ignition switch off to troubleshoot:

Connect the GTS to the vehicle, and turn a courtesy switch on and off at 1.5 second intervals until communication between the GTS and vehicle begins.

·

Inspect the fuses for circuits related to this system before performing the following procedure.

·

Before performing troubleshooting, check whether there are any malfunctions with related system.

Lighting system (w/ Headlight ECU): Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM (w/ Headlight ECU)>HOW TO PROCEED WITH TROUBLESHOOTING

Lighting system (w/o Headlight ECU): Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM (w/o Headlight ECU)>HOW TO PROCEED WITH TROUBLESHOOTING

Wiper and washer system: Click hereVehicle Exterior>WIPER / WASHER>WIPER AND WASHER SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING



PROCEDURE

1.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Power Integration No.1 > Clear DTCs
50002 473

Result:
Proceed to
NEXT



NEXT

2.CHECK FOR DTC
2.CHECK FOR DTC
a.

Check for DTCs.

Body Electrical > Power Integration No.1 > Trouble Codes
50001 473

Result:
Result Proceed to
B235204 is output A
B235204 is not output B



A

REPLACE SEMICONDUCTOR POWER INTEGRATION ECU

B