81260A 1.REMOVE MAP LIGHT ASSEMBLY
|
Place Hands Here |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
|
Remove in this Direction (3) |
Using moulding remover D, insert the position as shown in the illustration.
Place your hand in the gap as shown in the illustration.
Pull in the removal direction (1) as shown in the illustration and detach the clip.
Pull in the removal direction (2) as shown in the illustration and detach the clip.
Pull in the removal direction (3) as shown in the illustration and detach the guide and remove the map light assembly.
Disconnect the 3 connectors.