| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | COURTESY LIGHT ASSEMBLY | 81230 | ( ) |
- | - |
| 2 | COURTESY LIGHT BULB | 81230B | - | - | - |
| *A | for Bulb Type | *B | for LED Type |
| *1 | COVER | *2 | HOUSING |
Use the same procedure for the RH and LH sides.
The following procedure is for the LH side.
81230 1.REMOVE COURTESY LIGHT ASSEMBLY
for LH Side:
|
Remove in this Direction | - | - |
Apply protective tape as shown in the illustration.
Using moulding remover A, detach the claw.
Detach the guide as shown in the illustration.
Disconnect the connector and remove the courtesy light assembly.
for RH Side:
|
Remove in this Direction | - | - |
Apply protective tape as shown in the illustration.
Using moulding remover A, detach the claw.
Detach the guide as shown in the illustration.
Disconnect the connector and remove the courtesy light assembly.
81230B 2.REMOVE COURTESY LIGHT BULB