81240B 1.REMOVE NO. 1 ROOM LIGHT BULB (for Dome Type)
w/o Overhead Console:
Using a thin-bladed screwdriver, detach the claw and guide and remove the No. 1 room light lens.
Tape the thin-bladed screwdriver tip before use.
Remove the No. 1 room light bulb.
w/ Overhead Console:
Using a thin-bladed screwdriver, detach the claw and guide and remove the No. 1 room light lens.
Tape the thin-bladed screwdriver tip before use.
Remove the No. 1 room light bulb.
81360T 2.REMOVE SPOT LIGHT ASSEMBLY (for Spot Type)
81360U 3.REMOVE SPOT LIGHT BULB (for Spot Type)
|
Remove in this Direction |
Remove the 2 spot light bulbs.
81240E 4.REMOVE NO. 2 ROOM LIGHT BULB
w/o Overhead Console:
Using a thin-bladed screwdriver, detach the claw and guide and remove the No. 2 room light lens.
Tape the thin-bladed screwdriver tip before use.
Remove the No. 2 room light bulb.
w/ Overhead Console:
Using a thin-bladed screwdriver, detach the claw and guide and remove the No. 2 room light lens.
Tape the thin-bladed screwdriver tip before use.
Remove the No. 2 room light bulb.
81240E 5.INSTALL NO. 2 ROOM LIGHT BULB
w/o Overhead Console:
Install the No. 2 room light bulb.
Attach the guide and claw and install the No. 2 room light lens.
w/ Overhead Console:
Install the No. 2 room light bulb.
Attach the guide and claw and install the No. 2 room light lens.
81360U 6.INSTALL SPOT LIGHT BULB (for Spot Type)
|
Install in this Direction |
Install the 2 spot light bulbs.
81360T 7.INSTALL SPOT LIGHT ASSEMBLY (for Spot Type)
81240B 8.INSTALL NO. 1 ROOM LIGHT BULB (for Dome Type)
w/o Overhead Console:
Install the No. 1 room light bulb.
Attach the guide and claw and install the No. 1 room light lens.
w/ Overhead Console:
Install the No. 1 room light bulb.
Attach the guide and claw and install the No. 1 room light lens.