| *A | w/ Front Camera | *B | w/o Front Camera |
|
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
87810 1.INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o Front Camera)
|
Install in this Direction | - | - |
Temporarily install the inner rear view mirror assembly as shown in the illustration.
Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.
Connect the connector.
87810 2.INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ Front Camera)
|
Install in this Direction | - | - |
Temporarily install the inner rear view mirror assembly as shown in the illustration.
Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.
Attach the claw.
Connect the connector.
87834 3.INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Front Camera)
86466D 4.INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Front Camera)
86466E 5.INSTALL NO. 2 FORWARD RECOGNITION COVER (w/ Front Camera)